dpkg-source(1) — Linux manual page
dpkg-source(1) dpkg suite dpkg-source(1)
NAME
dpkg-source - Debian source package (.dsc) manipulation tool
SYNOPSIS
dpkg-source [option...] command
DESCRIPTION
dpkg-source packs and unpacks Debian source archives.
None of these commands allow multiple options to be combined into
one, and they do not allow the value for an option to be
specified in a separate argument.
COMMANDS
-x, --extract filename.dsc [output-directory]
Extract a source package (--extract since dpkg 1.17.14). One
non-option argument must be supplied, the name of the Debian
source control file (.dsc). An optional second non-option
argument may be supplied to specify the directory to extract
the source package to, this must not exist. If no output
directory is specified, the source package is extracted into
a directory named source-version under the current working
directory.
dpkg-source will read the names of the other file(s) making
up the source package from the control file; they are assumed
to be in the same directory as the .dsc.
The files in the extracted package will have their
permissions and ownerships set to those which would have been
expected if the files and directories had simply been created
- directories and executable files will be 0777 and plain
files will be 0666, both modified by the extractors' umask;
if the parent directory is setgid then the extracted
directories will be too, and all the files and directories
will inherit its group ownership.
If the source package uses a non-standard format (currently
this means all formats except “1.0”), its name will be stored
in debian/source/format so that the following builds of the
source package use the same format by default.
-b, --build directory [format-specific-parameters]
Build a source package (--build since dpkg 1.17.14). The
first non-option argument is taken as the name of the
directory containing the debianized source tree (i.e. with a
debian sub-directory and maybe changes to the original
files). Depending on the source package format used to build
the package, additional parameters might be accepted.
dpkg-source will build the source package with the first
format found in this ordered list: the format indicated with
the --format command line option, the format indicated in
debian/source/format, “1.0”. The fallback to “1.0” is
deprecated and will be removed at some point in the future,
you should always document the desired source format in
debian/source/format. See section "SOURCE PACKAGE FORMATS"
for an extensive description of the various source package
formats.
--print-format directory
Print the source format that would be used to build the
source package if dpkg-source --build directory was called
(in the same conditions and with the same parameters; since
dpkg 1.15.5).
--before-build directory
Run the corresponding hook of the source package format
(since dpkg 1.15.8). This hook is called before any build of
the package (dpkg-buildpackage calls it very early even
before debian/rules clean). This command is idempotent and
can be called multiple times. Not all source formats
implement something in this hook, and those that do usually
prepare the source tree for the build for example by ensuring
that the Debian patches are applied.
--after-build directory
Run the corresponding hook of the source package format
(since dpkg 1.15.8). This hook is called after any build of
the package (dpkg-buildpackage calls it last). This command
is idempotent and can be called multiple times. Not all
source formats implement something in this hook, and those
that do usually use it to undo what --before-build has done.
--commit [directory] ...
Record changes in the source tree unpacked in directory
(since dpkg 1.16.1). This command can take supplementary
parameters depending on the source format. It will error out
for formats where this operation doesn't mean anything.
-?, --help
Show the usage message and exit. The format specific build
and extract options can be shown by using the --format
option.
--version
Show the version and exit.
OPTIONS
Generic build options
-ccontrol-file
Specifies the main source control file to read information
from. The default is debian/control. If given with relative
pathname this is interpreted starting at the source tree's
top level directory.
-lchangelog-file
Specifies the changelog file to read information from. The
default is debian/changelog. If given with relative pathname
this is interpreted starting at the source tree's top level
directory.
-Fchangelog-format
Specifies the format of the changelog. See
dpkg-parsechangelog(1) for information about alternative
formats.
--format=value
Use the given format for building the source package (since
dpkg 1.14.17). It does override any format given in
debian/source/format.
-Vname=value
Set an output substitution variable. See deb-substvars(5)
for a discussion of output substitution.
-Tsubstvars-file
Read substitution variables in substvars-file; the default is
to not read any file. This option can be used multiple times
to read substitution variables from multiple files (since
dpkg 1.15.6).
-Dfield=value
Override or add an output control file field.
-Ufield
Remove an output control file field.
-Zcompression, --compression=compression
Specify the compression to use for created tarballs and diff
files (--compression since dpkg 1.15.5). Note that this
option will not cause existing tarballs to be recompressed,
it only affects new files. Supported values are: gzip,
bzip2, lzma and xz. The default is xz for formats 2.0 and
newer, and gzip for format 1.0. xz is only supported since
dpkg 1.15.5.
-zlevel, --compression-level=level
Compression level to use (--compression-level since dpkg
1.15.5). As with -Z it only affects newly created files.
Supported values are: 1 to 9, best, and fast. The default is
9 for gzip and bzip2, 6 for xz and lzma.
-i[regex], --diff-ignore[=regex]
You may specify a perl regular expression to match files you
want filtered out of the list of files for the diff
(--diff-ignore since dpkg 1.15.6). (This list is generated
by a find command.) (If the source package is being built as
a version 3 source package using a VCS, this can be used to
ignore uncommitted changes on specific files. Using -i.*
will ignore all of them.)
The -i option by itself enables this setting with a default
regex (preserving any modification to the default regex done
by a previous use of --extend-diff-ignore) that will filter
out control files and directories of the most common revision
control systems, backup and swap files and Libtool build
output directories. There can only be one active regex, of
multiple -i options only the last one will take effect.
This is very helpful in cutting out extraneous files that get
included in the diff, for example if you maintain your source
in a revision control system and want to use a checkout to
build a source package without including the additional files
and directories that it will usually contain (e.g. CVS/,
.cvsignore, .svn/). The default regex is already very
exhaustive, but if you need to replace it, please note that
by default it can match any part of a path, so if you want to
match the begin of a filename or only full filenames, you
will need to provide the necessary anchors (e.g. ‘(^|/)’,
‘($|/)’) yourself.
--extend-diff-ignore=regex
The perl regular expression specified will extend the default
value used by --diff-ignore and its current value, if set
(since dpkg 1.15.6). It does this by concatenating “|regex”
to the existing value. This option is convenient to use in
debian/source/options to exclude some auto-generated files
from the automatic patch generation.
-I[file-pattern], --tar-ignore[=file-pattern]
If this option is specified, the pattern will be passed to
tar(1)'s --exclude option when it is called to generate a
.orig.tar or .tar file (--tar-ignore since dpkg 1.15.6). For
example, -ICVS will make tar skip over CVS directories when
generating a .tar.gz file. The option may be repeated
multiple times to list multiple patterns to exclude.
-I by itself adds default --exclude options that will filter
out control files and directories of the most common revision
control systems, backup and swap files and Libtool build
output directories.
Note: While they have similar purposes, -i and -I have very
different syntax and semantics. -i can only be specified once
and takes a perl compatible regular expression which is matched
against the full relative path of each file. -I can specified
multiple times and takes a filename pattern with shell wildcards.
The pattern is applied to the full relative path but also to each
part of the path individually. The exact semantic of tar's
--exclude option is somewhat complicated, see
<https://www.gnu.org/software/tar/manual/tar.html#wildcards> for
a full documentation.
The default regex and patterns for both options can be seen in
the output of the --help command.
Generic extract options
--no-copy
Do not copy original tarballs near the extracted source
package (since dpkg 1.14.17).
--no-check
Do not check signatures and checksums before unpacking (since
dpkg 1.14.17).
--no-overwrite-dir
Do not overwrite the extraction directory if it already
exists (since dpkg 1.18.8).
--require-valid-signature
Refuse to unpack the source package if it doesn't contain an
OpenPGP signature that can be verified (since dpkg 1.15.0)
either with the user's trustedkeys.gpg keyring, one of the
vendor-specific keyrings, or one of the official Debian
keyrings (/usr/share/keyrings/debian-keyring.gpg,
/usr/share/keyrings/debian-nonupload.gpg and
/usr/share/keyrings/debian-maintainers.gpg).
--require-strong-checksums
Refuse to unpack the source package if it does not contain
any strong checksums (since dpkg 1.18.7). Currently the only
known checksum considered strong is SHA-256.
--ignore-bad-version
Turns the bad source package version check into a non-fatal
warning (since dpkg 1.17.7). This option should only be
necessary when extracting ancient source packages with broken
versions, just for backwards compatibility.
Generic general options
--threads-max=threads
Sets the maximum number of threads allowed for compressors
that support multi-threaded operations (since dpkg 1.21.14).
-q Sets quiet mode to suppress warnings.
SOURCE PACKAGE FORMATS
If you don't know what source format to use, you should probably
pick either “3.0 (quilt)” or “3.0 (native)”. See
<https://wiki.debian.org/Projects/DebSrc3.0> for information on
the deployment of those formats within Debian.
Format: 1.0
A source package in this format consists either of a .orig.tar.gz
associated to a .diff.gz or a single .tar.gz (in that case the
package is said to be native). Optionally the original tarball
might be accompanied by a detached upstream signature
.orig.tar.gz.asc, extraction supported since dpkg 1.18.5.
Extracting
Extracting a native package is a simple extraction of the single
tarball in the target directory. Extracting a non-native package
is done by first unpacking the .orig.tar.gz and then applying the
patch contained in the .diff.gz file. The timestamp of all
patched files is reset to the extraction time of the source
package (this avoids timestamp skews leading to problems when
autogenerated files are patched). The diff can create new files
(the whole debian directory is created that way) but cannot
remove files (empty files will be left over) and cannot create or
change symlinks.
Building
Building a native package is just creating a single tarball with
the source directory. Building a non-native package involves
extracting the original tarball in a separate “.orig” directory
and regenerating the .diff.gz by comparing the source package
directory with the .orig directory.
Build options (with --build):
If a second non-option argument is supplied it should be the name
of the original source directory or tarfile or the empty string
if the package is a Debian-specific one and so has no
debianization diffs. If no second argument is supplied then
dpkg-source will look for the original source tarfile
package_upstream-version.orig.tar.gz or the original source
directory directory.orig depending on the -sX arguments.
-sa, -sp, -sk, -su and -sr will not overwrite existing tarfiles
or directories. If this is desired then -sA, -sP, -sK, -sU and
-sR should be used instead.
-sk Specifies to expect the original source as a tarfile, by
default package_upstream-version.orig.tar.extension. It will
leave this original source in place as a tarfile, or copy it
to the current directory if it isn't already there. The
tarball will be unpacked into directory.orig for the
generation of the diff.
-sp Like -sk but will remove the directory again afterwards.
-su Specifies that the original source is expected as a
directory, by default package-upstream-version.orig and dpkg-
source will create a new original source archive from it.
-sr Like -su but will remove that directory after it has been
used.
-ss Specifies that the original source is available both as a
directory and as a tarfile. dpkg-source will use the
directory to create the diff, but the tarfile to create the
.dsc. This option must be used with care - if the directory
and tarfile do not match a bad source archive will be
generated.
-sn Specifies to not look for any original source, and to not
generate a diff. The second argument, if supplied, must be
the empty string. This is used for Debian-specific packages
which do not have a separate upstream source and therefore
have no debianization diffs.
-sa or -sA
Specifies to look for the original source archive as a
tarfile or as a directory - the second argument, if any, may
be either, or the empty string (this is equivalent to using
-sn). If a tarfile is found it will unpack it to create the
diff and remove it afterwards (this is equivalent to -sp); if
a directory is found it will pack it to create the original
source and remove it afterwards (this is equivalent to -sr);
if neither is found it will assume that the package has no
debianization diffs, only a straightforward source archive
(this is equivalent to -sn). If both are found then dpkg-
source will ignore the directory, overwriting it, if -sA was
specified (this is equivalent to -sP) or raise an error if
-sa was specified. -sa is the default.
--abort-on-upstream-changes
The process fails if the generated diff contains changes to
files outside of the debian sub-directory (since dpkg
1.15.8). This option is not allowed in debian/source/options
but can be used in debian/source/local-options.
Extract options (with --extract):
In all cases any existing original source tree will be removed.
-sp Used when extracting then the original source (if any) will
be left as a tarfile. If it is not already located in the
current directory or if an existing but different file is
there it will be copied there. (This is the default).
-su Unpacks the original source tree.
-sn Ensures that the original source is neither copied to the
current directory nor unpacked. Any original source tree
that was in the current directory is still removed.
All the -sX options are mutually exclusive. If you specify more
than one only the last one will be used.
--skip-debianization
Skips application of the debian diff on top of the upstream
sources (since dpkg 1.15.1).
Format: 2.0
Extraction supported since dpkg 1.13.9, building supported since
dpkg 1.14.8. Also known as wig&pen. This format is not
recommended for wide-spread usage, the format “3.0 (quilt)”
replaces it. Wig&pen was the first specification of a new-
generation source package format.
The behavior of this format is the same as the “3.0 (quilt)”
format except that it doesn't use an explicit list of patches.
All files in debian/patches/ matching the perl regular expression
[\w-]+ must be valid patches: they are applied at extraction
time.
When building a new source package, any change to the upstream
source is stored in a patch named zz_debian-diff-auto.
Format: 3.0 (native)
Supported since dpkg 1.14.17. This format is an extension of the
native package format as defined in the 1.0 format. It supports
all compression methods and will ignore by default any VCS
specific files and directories as well as many temporary files
(see default value associated to -I option in the --help output).
Format: 3.0 (quilt)
Supported since dpkg 1.14.17. A source package in this format
contains at least an original tarball (.orig.tar.ext where ext
can be gz, bz2, lzma and xz) and a debian tarball
(.debian.tar.ext). It can also contain additional original
tarballs (.orig-component.tar.ext). component can only contain
alphanumeric (‘a-zA-Z0-9’) characters and hyphens (‘-’).
Optionally each original tarball can be accompanied by a detached
upstream signature (.orig.tar.ext.asc and
.orig-component.tar.ext.asc), extraction supported since dpkg
1.17.20, building supported since dpkg 1.18.5.
Extracting
The main original tarball is extracted first, then all additional
original tarballs are extracted in subdirectories named after the
component part of their filename (any pre-existing directory is
replaced). The debian tarball is extracted on top of the source
directory after prior removal of any pre-existing debian
directory. Note that the debian tarball must contain a debian
sub-directory but it can also contain binary files outside of
that directory (see --include-binaries option).
All patches listed in debian/patches/vendor.series or
debian/patches/series are then applied, where vendor will be the
lowercase name of the current vendor, or debian if there is no
vendor defined. If the former file is used and the latter one
doesn't exist (or is a symlink), then the latter is replaced with
a symlink to the former. This is meant to simplify usage of
quilt to manage the set of patches. Vendor-specific series files
are intended to make it possible to serialize multiple
development branches based on the vendor, in a declarative way,
in preference to open-coding this handling in debian/rules. This
is particularly useful when the source would need to be patched
conditionally because the affected files do not have built-in
conditional occlusion support. Note however that while dpkg-
source parses correctly series files with explicit options used
for patch application (stored on each line after the patch
filename and one or more spaces), it does ignore those options
and always expects patches that can be applied with the -p1
option of patch. It will thus emit a warning when it encounters
such options, and the build is likely to fail.
Note that lintian(1) will emit unconditional warnings when using
vendor series due to a controversial Debian specific ruling,
which should not affect any external usage; to silence these, the
dpkg lintian profile can be used by passing «--profile dpkg» to
lintian(1).
The timestamp of all patched files is reset to the extraction
time of the source package (this avoids timestamp skews leading
to problems when autogenerated files are patched).
Contrary to quilt's default behavior, patches are expected to
apply without any fuzz. When that is not the case, you should
refresh such patches with quilt, or dpkg-source will error out
while trying to apply them.
Similarly to quilt's default behavior, the patches can remove
files too.
The file .pc/applied-patches is created if some patches have been
applied during the extraction.
Building
All original tarballs found in the current directory are
extracted in a temporary directory by following the same logic as
for the unpack, the debian directory is copied over in the
temporary directory, and all patches except the automatic patch
(debian-changes-version or debian-changes, depending on
--single-debian-patch) are applied. The temporary directory is
compared to the source package directory. When the diff is non-
empty, the build fails unless --single-debian-patch or
--auto-commit has been used, in which case the diff is stored in
the automatic patch. If the automatic patch is created/deleted,
it's added/removed from the series file and from the quilt
metadata.
Any change on a binary file is not representable in a diff and
will thus lead to a failure unless the maintainer deliberately
decided to include that modified binary file in the debian
tarball (by listing it in debian/source/include-binaries). The
build will also fail if it finds binary files in the debian sub-
directory unless they have been allowed through
debian/source/include-binaries.
The updated debian directory and the list of modified binaries is
then used to generate the debian tarball.
The automatically generated diff doesn't include changes on VCS
specific files as well as many temporary files (see default value
associated to -i option in the --help output). In particular,
the .pc directory used by quilt is ignored during generation of
the automatic patch.
Note: dpkg-source --before-build (and --build) will ensure that
all patches listed in the series file are applied so that a
package build always has all patches applied. It does this by
finding unapplied patches (they are listed in the series file but
not in .pc/applied-patches), and if the first patch in that set
can be applied without errors, it will apply them all. The
option --no-preparation can be used to disable this behavior.
Recording changes
--commit [directory] [patch-name] [patch-file]
Generates a patch corresponding to the local changes that are
not managed by the quilt patch system and integrates it in
the patch system under the name patch-name. If the name is
missing, it will be asked interactively. If patch-file is
given, it is used as the patch corresponding to the local
changes to integrate. Once integrated, an editor (the first
one found from sensible-editor, $VISUAL, $EDITOR, vi) is
launched so that you can edit the meta-information in the
patch header.
Passing patch-file is mainly useful after a build failure
that pre-generated this file, and on this ground the given
file is removed after integration. Note also that the
changes contained in the patch file must already be applied
on the tree and that the files modified by the patch must not
have supplementary unrecorded changes.
If the patch generation detects modified binary files, they
will be automatically added to debian/source/include-binaries
so that they end up in the debian tarball (exactly like dpkg-
source --include-binaries --build would do).
Build options
--allow-version-of-quilt-db=version
Allow dpkg-source to build the source package if the version
of the quilt metadata is the one specified, even if dpkg-
source doesn't know about it (since dpkg 1.15.5.4).
Effectively this says that the given version of the quilt
metadata is compatible with the version 2 that dpkg-source
currently supports. The version of the quilt metadata is
stored in .pc/.version.
--include-removal
Do not ignore removed files and include them in the
automatically generated patch.
--include-timestamp
Include timestamp in the automatically generated patch.
--include-binaries
Add all modified binaries in the debian tarball. Also add
them to debian/source/include-binaries: they will be added by
default in subsequent builds and this option is thus no more
needed.
--no-preparation
Do not try to prepare the build tree by applying patches
which are apparently unapplied (since dpkg 1.14.18).
--single-debian-patch
Use debian/patches/debian-changes instead of
debian/patches/debian-changes-version for the name of the
automatic patch generated during build (since dpkg 1.15.5.4).
This option is particularly useful when the package is
maintained in a VCS and a patch set can't reliably be
generated. Instead the current diff with upstream should be
stored in a single patch. The option would be put in
debian/source/local-options and would be accompanied by a
debian/source/local-patch-header file explaining how the
Debian changes can be best reviewed, for example in the VCS
that is used.
--create-empty-orig
Automatically create the main original tarball as empty if
it's missing and if there are supplementary original tarballs
(since dpkg 1.15.6). This option is meant to be used when
the source package is just a bundle of multiple upstream
software and where there's no “main” software.
--no-unapply-patches, --unapply-patches
By default, dpkg-source will automatically unapply the
patches in the --after-build hook if it did apply them during
--before-build (--unapply-patches since dpkg 1.15.8,
--no-unapply-patches since dpkg 1.16.5). Those options allow
you to forcefully disable or enable the patch unapplication
process. Those options are only allowed in
debian/source/local-options so that all generated source
packages have the same behavior by default.
--abort-on-upstream-changes
The process fails if an automatic patch has been generated
(since dpkg 1.15.8). This option can be used to ensure that
all changes were properly recorded in separate quilt patches
prior to the source package build. This option is not
allowed in debian/source/options but can be used in
debian/source/local-options.
--auto-commit
The process doesn't fail if an automatic patch has been
generated, instead it's immediately recorded in the quilt
series.
Extract options
--skip-debianization
Skips extraction of the debian tarball on top of the upstream
sources (since dpkg 1.15.1).
--skip-patches
Do not apply patches at the end of the extraction (since dpkg
1.14.18).
Format: 3.0 (custom)
Supported since dpkg 1.14.17. This format is special. It
doesn't represent a real source package format but can be used to
create source packages with arbitrary files.
Build options
All non-option arguments are taken as files to integrate in the
generated source package. They must exist and are preferably in
the current directory. At least one file must be given.
--target-format=value
Required. Defines the real format of the generated source
package. The generated .dsc file will contain this value in
its Format field and not “3.0 (custom)”.
Format: 3.0 (git)
Supported since dpkg 1.14.17. This format is experimental.
A source package in this format consists of a single bundle of a
git repository .git to hold the source of a package. There may
also be a .gitshallow file listing revisions for a shallow git
clone.
Extracting
The bundle is cloned as a git repository to the target directory.
If there is a gitshallow file, it is installed as .git/shallow
inside the cloned git repository.
Note that by default the new repository will have the same branch
checked out that was checked out in the original source.
(Typically “main”, but it could be anything.) Any other branches
will be available under remotes/origin/.
Building
Before going any further, some checks are done to ensure that we
don't have any non-ignored uncommitted changes.
git-bundle(1) is used to generate a bundle of the git repository.
By default, all branches and tags in the repository are included
in the bundle.
Build options
--git-ref=ref
Allows specifying a git ref to include in the git bundle.
Use disables the default behavior of including all branches
and tags. May be specified multiple times. The ref can be
the name of a branch or tag to include. It may also be any
parameter that can be passed to git-rev-list(1). For
example, to include only the main branch, use --git-ref=main.
To include all tags and branches, except for the private
branch, use --git-ref=--all --git-ref=^private
--git-depth=number
Creates a shallow clone with a history truncated to the
specified number of revisions.
Format: 3.0 (bzr)
Supported since dpkg 1.14.17. This format is experimental. It
generates a single tarball containing the bzr repository.
Extracting
The tarball is unpacked and then bzr is used to checkout the
current branch.
Building
Before going any further, some checks are done to ensure that we
don't have any non-ignored uncommitted changes.
Then the VCS specific part of the source directory is copied over
to a temporary directory. Before this temporary directory is
packed in a tarball, various cleanup are done to save space.
DIAGNOSTICS
no source format specified in debian/source/format
The file debian/source/format should always exist and indicate
the desired source format. For backwards compatibility, format
“1.0” is assumed when the file doesn't exist but you should not
rely on this: at some point in the future dpkg-source will be
modified to fail when that file doesn't exist.
The rationale is that format “1.0” is no longer the recommended
format, you should usually pick one of the newer formats (“3.0
(quilt)”, “3.0 (native)”) but dpkg-source will not do this
automatically for you. If you want to continue using the old
format, you should be explicit about it and put “1.0” in
debian/source/format.
the diff modifies the following upstream files
When using source format “1.0” it is usually a bad idea to modify
upstream files directly as the changes end up hidden and mostly
undocumented in the .diff.gz file. Instead you should store your
changes as patches in the debian directory and apply them at
build-time. To avoid this complexity you can also use the format
“3.0 (quilt)” that offers this natively.
[1mcannot represent change to file
Changes to upstream sources are usually stored with patch files,
but not all changes can be represented with patches: they can
only alter the content of plain text files. If you try replacing
a file with something of a different type (for example replacing
a plain file with a symlink or a directory), you will get this
error message.
newly created empty file file will not be represented in diff
Empty files can't be created with patch files. Thus this change
is not recorded in the source package and you are warned about
it.
executable mode perms of file will not be represented in diff
Patch files do not record permissions of files and thus
executable permissions are not stored in the source package.
This warning reminds you of that fact.
special mode perms of file will not be represented in diff
Patch files do not record permissions of files and thus modified
permissions are not stored in the source package. This warning
reminds you of that fact.
ENVIRONMENT
DPKG_COLORS
Sets the color mode (since dpkg 1.18.5). The currently
accepted values are: auto (default), always and never.
DPKG_NLS
If set, it will be used to decide whether to activate Native
Language Support, also known as internationalization (or
i18n) support (since dpkg 1.19.0). The accepted values are:
0 and 1 (default).
SOURCE_DATE_EPOCH
If set, it will be used as the timestamp (as seconds since
the epoch) to clamp the mtime in the tar(5) file entries.
Since dpkg 1.18.11.
VISUAL
EDITOR
Used by the “2.0” and “3.0 (quilt)” source format modules.
GIT_DIR
GIT_INDEX_FILE
GIT_OBJECT_DIRECTORY
GIT_ALTERNATE_OBJECT_DIRECTORIES
GIT_WORK_TREE
Used by the “3.0 (git)” source format modules.
FILES
debian/source/format
This file contains on a single line the format that should be
used to build the source package (possible formats are described
above). No leading or trailing spaces are allowed.
debian/source/include-binaries
This file contains a list of pathnames of binary files (one per
line) relative to the source root directory that should be
included in the debian tarball. Leading and trailing spaces are
stripped. Lines starting with ‘#’ are comments and are skipped.
Empty lines are ignored.
debian/source/options
This file contains a list of long options that should be
automatically prepended to the set of command line options of a
dpkg-source --build or dpkg-source --print-format call. Options
like --compression and --compression-level are well suited for
this file.
Each option should be put on a separate line. Empty lines and
lines starting with ‘#’ are ignored. The leading ‘--’ should be
stripped and short options are not allowed. Optional spaces are
allowed around the ‘=’ symbol and optional quotes are allowed
around the value. Here's an example of such a file:
# let dpkg-source create a debian.tar.bz2 with maximal compression
compression = "bzip2"
compression-level = 9
# use debian/patches/debian-changes as automatic patch
single-debian-patch
# ignore changes on config.{sub,guess}
extend-diff-ignore = "(^|/)(config.sub|config.guess)$"
Note: format options are not accepted in this file, you should
use debian/source/format instead.
debian/source/local-options
Exactly like debian/source/options except that the file is not
included in the generated source package. It can be useful to
store a preference tied to the maintainer or to the VCS
repository where the source package is maintained.
debian/source/local-patch-header
debian/source/patch-header
Free form text that is put on top of the automatic patch
generated in formats “2.0” or “3.0 (quilt)”. local-patch-header
is not included in the generated source package while patch-
header is.
debian/patches/vendor.series
debian/patches/series
This file lists all patches that have to be applied (in the given
order) on top of the upstream source package. Leading and
trailing spaces are stripped. The vendor will be the lowercase
name of the current vendor, or debian if there is no vendor
defined. If the vendor-specific series file does not exist, the
vendor-less series file will be used. Lines starting with ‘#’
are comments and are skipped. Empty lines are ignored.
Remaining lines start with a patch filename (relative to the
debian/patches/ directory) up to the first space character or the
end of line. Optional quilt options can follow up to the end of
line or the first ‘#’ preceded by one or more spaces (which marks
the start of a comment up to the end of line).
SECURITY
Examining untrusted source packages or extracting them into
staging directories should be considered a security boundary, and
any breakage of that boundary stemming from these operations
should be considered a security vulnerability. But handling
untrusted source packages should not be done lightly, as the
surface area includes any compression command supported, commands
to handle specific data formats (such as tar(1) or patch(1)) in
addition to the source package formats and control files
themselves. Performing these operations over untrusted data as
root is strongly discouraged.
Building source packages should only be performed over trusted
data.
BUGS
The point at which field overriding occurs compared to certain
standard output field settings is rather confused.
SEE ALSO
deb-src-control(5), deb-changelog(5), deb-substvars(5), dsc(5).
COLOPHON
This page is part of the dpkg (Debian Package Manager) project.
Information about the project can be found at
⟨https://wiki.debian.org/Teams/Dpkg/⟩. If you have a bug report
for this manual page, see
⟨http://bugs.debian.org/cgi-bin/pkgreport.cgi?src=dpkg⟩. This
page was obtained from the project's upstream Git repository ⟨git
clone https://git.dpkg.org/git/dpkg/dpkg.git⟩ on 2024-06-14. (At
that time, the date of the most recent commit that was found in
the repository was 2024-05-21.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
1.22.6-77-g86fe7 2024-03-10 dpkg-source(1)
Pages that refer to this page: dpkg-buildpackage(1), deb-src-control(5), deb-substvars(5), dsc(5)