git-restore(1) — Linux manual page
GIT-RESTORE(1) Git Manual GIT-RESTORE(1)
NAME
git-restore - Restore working tree files
SYNOPSIS
git restore [<options>] [--source=<tree>] [--staged] [--worktree] [--] <pathspec>...
git restore [<options>] [--source=<tree>] [--staged] [--worktree] --pathspec-from-file=<file> [--pathspec-file-nul]
git restore (-p|--patch) [<options>] [--source=<tree>] [--staged] [--worktree] [--] [<pathspec>...]
DESCRIPTION
Restore specified paths in the working tree with some contents
from a restore source. If a path is tracked but does not exist in
the restore source, it will be removed to match the source.
The command can also be used to restore the content in the index
with --staged, or restore both the working tree and the index
with --staged --worktree.
By default, if --staged is given, the contents are restored from
HEAD, otherwise from the index. Use --source to restore from a
different commit.
See "Reset, restore and revert" in git(1) for the differences
between the three commands.
THIS COMMAND IS EXPERIMENTAL. THE BEHAVIOR MAY CHANGE.
OPTIONS
-s <tree>, --source=<tree>
Restore the working tree files with the content from the
given tree. It is common to specify the source tree by naming
a commit, branch or tag associated with it.
If not specified, the contents are restored from HEAD if
--staged is given, otherwise from the index.
As a special case, you may use "A...B" as a shortcut for the
merge base of A and B if there is exactly one merge base. You
can leave out at most one of A and B, in which case it
defaults to HEAD.
-p, --patch
Interactively select hunks in the difference between the
restore source and the restore location. See the “Interactive
Mode” section of git-add(1) to learn how to operate the
--patch mode.
Note that --patch can accept no pathspec and will prompt to
restore all modified paths.
-W, --worktree, -S, --staged
Specify the restore location. If neither option is specified,
by default the working tree is restored. Specifying --staged
will only restore the index. Specifying both restores both.
-q, --quiet
Quiet, suppress feedback messages. Implies --no-progress.
--progress, --no-progress
Progress status is reported on the standard error stream by
default when it is attached to a terminal, unless --quiet is
specified. This flag enables progress reporting even if not
attached to a terminal, regardless of --quiet.
--ours, --theirs
When restoring files in the working tree from the index, use
stage #2 (ours) or #3 (theirs) for unmerged paths. This
option cannot be used when checking out paths from a tree-ish
(i.e. with the --source option).
Note that during git rebase and git pull --rebase, ours and
theirs may appear swapped. See the explanation of the same
options in git-checkout(1) for details.
-m, --merge
When restoring files on the working tree from the index,
recreate the conflicted merge in the unmerged paths. This
option cannot be used when checking out paths from a tree-ish
(i.e. with the --source option).
--conflict=<style>
The same as --merge option above, but changes the way the
conflicting hunks are presented, overriding the
merge.conflictStyle configuration variable. Possible values
are "merge" (default), "diff3", and "zdiff3".
--ignore-unmerged
When restoring files on the working tree from the index, do
not abort the operation if there are unmerged entries and
neither --ours, --theirs, --merge or --conflict is specified.
Unmerged paths on the working tree are left alone.
--ignore-skip-worktree-bits
In sparse checkout mode, the default is to only update
entries matched by <pathspec> and sparse patterns in
$GIT_DIR/info/sparse-checkout. This option ignores the sparse
patterns and unconditionally restores any files in
<pathspec>.
--recurse-submodules, --no-recurse-submodules
If <pathspec> names an active submodule and the restore
location includes the working tree, the submodule will only
be updated if this option is given, in which case its working
tree will be restored to the commit recorded in the
superproject, and any local modifications overwritten. If
nothing (or --no-recurse-submodules) is used, submodules
working trees will not be updated. Just like git-checkout(1),
this will detach HEAD of the submodule.
--overlay, --no-overlay
In overlay mode, the command never removes files when
restoring. In no-overlay mode, tracked files that do not
appear in the --source tree are removed, to make them match
<tree> exactly. The default is no-overlay mode.
--pathspec-from-file=<file>
Pathspec is passed in <file> instead of commandline args. If
<file> is exactly - then standard input is used. Pathspec
elements are separated by LF or CR/LF. Pathspec elements can
be quoted as explained for the configuration variable
core.quotePath (see git-config(1)). See also
--pathspec-file-nul and global --literal-pathspecs.
--pathspec-file-nul
Only meaningful with --pathspec-from-file. Pathspec elements
are separated with NUL character and all other characters are
taken literally (including newlines and quotes).
--
Do not interpret any more arguments as options.
<pathspec>...
Limits the paths affected by the operation.
For more details, see the pathspec entry in gitglossary(7).
EXAMPLES
The following sequence switches to the master branch, reverts the
Makefile to two revisions back, deletes hello.c by mistake, and
gets it back from the index.
$ git switch master
$ git restore --source master~2 Makefile (1)
$ rm -f hello.c
$ git restore hello.c (2)
1. take a file out of another commit
2. restore hello.c from the index
If you want to restore all C source files to match the version in
the index, you can say
$ git restore '*.c'
Note the quotes around *.c. The file hello.c will also be
restored, even though it is no longer in the working tree,
because the file globbing is used to match entries in the index
(not in the working tree by the shell).
To restore all files in the current directory
$ git restore .
or to restore all working tree files with top pathspec magic (see
gitglossary(7))
$ git restore :/
To restore a file in the index to match the version in HEAD (this
is the same as using git-reset(1))
$ git restore --staged hello.c
or you can restore both the index and the working tree (this is
the same as using git-checkout(1))
$ git restore --source=HEAD --staged --worktree hello.c
or the short form which is more practical but less readable:
$ git restore -s@ -SW hello.c
SEE ALSO
git-checkout(1), git-reset(1)
GIT
Part of the git(1) suite
COLOPHON
This page is part of the git (Git distributed version control
system) project. Information about the project can be found at
⟨http://git-scm.com/⟩. If you have a bug report for this manual
page, see ⟨http://git-scm.com/community⟩. This page was obtained
from the project's upstream Git repository
⟨https://github.com/git/git.git⟩ on 2024-06-14. (At that time,
the date of the most recent commit that was found in the
repository was 2024-06-12.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
Git 2.45.2.492.gd63586 2024-06-12 GIT-RESTORE(1)
Pages that refer to this page: git(1), git-checkout(1), git-config(1), git-reset(1), git-revert(1), giteveryday(7)