git-worktree(1) — Linux manual page
GIT-WORKTREE(1) Git Manual GIT-WORKTREE(1)
NAME
git-worktree - Manage multiple working trees
SYNOPSIS
git worktree add [-f] [--detach] [--checkout] [--lock [--reason <string>]]
[--orphan] [(-b | -B) <new-branch>] <path> [<commit-ish>]
git worktree list [-v | --porcelain [-z]]
git worktree lock [--reason <string>] <worktree>
git worktree move <worktree> <new-path>
git worktree prune [-n] [-v] [--expire <expire>]
git worktree remove [-f] <worktree>
git worktree repair [<path>...]
git worktree unlock <worktree>
DESCRIPTION
Manage multiple working trees attached to the same repository.
A git repository can support multiple working trees, allowing you
to check out more than one branch at a time. With git worktree
add a new working tree is associated with the repository, along
with additional metadata that differentiates that working tree
from others in the same repository. The working tree, along with
this metadata, is called a "worktree".
This new worktree is called a "linked worktree" as opposed to the
"main worktree" prepared by git-init(1) or git-clone(1). A
repository has one main worktree (if it’s not a bare repository)
and zero or more linked worktrees. When you are done with a
linked worktree, remove it with git worktree remove.
In its simplest form, git worktree add <path> automatically
creates a new branch whose name is the final component of <path>,
which is convenient if you plan to work on a new topic. For
instance, git worktree add ../hotfix creates new branch hotfix
and checks it out at path ../hotfix. To instead work on an
existing branch in a new worktree, use git worktree add <path>
<branch>. On the other hand, if you just plan to make some
experimental changes or do testing without disturbing existing
development, it is often convenient to create a throwaway
worktree not associated with any branch. For instance, git
worktree add -d <path> creates a new worktree with a detached
HEAD at the same commit as the current branch.
If a working tree is deleted without using git worktree remove,
then its associated administrative files, which reside in the
repository (see "DETAILS" below), will eventually be removed
automatically (see gc.worktreePruneExpire in git-config(1)), or
you can run git worktree prune in the main or any linked worktree
to clean up any stale administrative files.
If the working tree for a linked worktree is stored on a portable
device or network share which is not always mounted, you can
prevent its administrative files from being pruned by issuing the
git worktree lock command, optionally specifying --reason to
explain why the worktree is locked.
COMMANDS
add <path> [<commit-ish>]
Create a worktree at <path> and checkout <commit-ish> into
it. The new worktree is linked to the current repository,
sharing everything except per-worktree files such as HEAD,
index, etc. As a convenience, <commit-ish> may be a bare "-",
which is synonymous with @{-1}.
If <commit-ish> is a branch name (call it <branch>) and is
not found, and neither -b nor -B nor --detach are used, but
there does exist a tracking branch in exactly one remote
(call it <remote>) with a matching name, treat as equivalent
to:
$ git worktree add --track -b <branch> <path> <remote>/<branch>
If the branch exists in multiple remotes and one of them is
named by the checkout.defaultRemote configuration variable,
we’ll use that one for the purposes of disambiguation, even
if the <branch> isn’t unique across all remotes. Set it to
e.g. checkout.defaultRemote=origin to always checkout remote
branches from there if <branch> is ambiguous but exists on
the origin remote. See also checkout.defaultRemote in
git-config(1).
If <commit-ish> is omitted and neither -b nor -B nor --detach
used, then, as a convenience, the new worktree is associated
with a branch (call it <branch>) named after $(basename
<path>). If <branch> doesn’t exist, a new branch based on
HEAD is automatically created as if -b <branch> was given. If
<branch> does exist, it will be checked out in the new
worktree, if it’s not checked out anywhere else, otherwise
the command will refuse to create the worktree (unless
--force is used).
If <commit-ish> is omitted, neither --detach, or --orphan is
used, and there are no valid local branches (or remote
branches if --guess-remote is specified) then, as a
convenience, the new worktree is associated with a new unborn
branch named <branch> (after $(basename <path>) if neither -b
or -B is used) as if --orphan was passed to the command. In
the event the repository has a remote and --guess-remote is
used, but no remote or local branches exist, then the command
fails with a warning reminding the user to fetch from their
remote first (or override by using -f/--force).
list
List details of each worktree. The main worktree is listed
first, followed by each of the linked worktrees. The output
details include whether the worktree is bare, the revision
currently checked out, the branch currently checked out (or
"detached HEAD" if none), "locked" if the worktree is locked,
"prunable" if the worktree can be pruned by the prune
command.
lock
If a worktree is on a portable device or network share which
is not always mounted, lock it to prevent its administrative
files from being pruned automatically. This also prevents it
from being moved or deleted. Optionally, specify a reason for
the lock with --reason.
move
Move a worktree to a new location. Note that the main
worktree or linked worktrees containing submodules cannot be
moved with this command. (The git worktree repair command,
however, can reestablish the connection with linked worktrees
if you move the main worktree manually.)
prune
Prune worktree information in $GIT_DIR/worktrees.
remove
Remove a worktree. Only clean worktrees (no untracked files
and no modification in tracked files) can be removed. Unclean
worktrees or ones with submodules can be removed with
--force. The main worktree cannot be removed.
repair [<path>...]
Repair worktree administrative files, if possible, if they
have become corrupted or outdated due to external factors.
For instance, if the main worktree (or bare repository) is
moved, linked worktrees will be unable to locate it. Running
repair in the main worktree will reestablish the connection
from linked worktrees back to the main worktree.
Similarly, if the working tree for a linked worktree is moved
without using git worktree move, the main worktree (or bare
repository) will be unable to locate it. Running repair
within the recently-moved worktree will reestablish the
connection. If multiple linked worktrees are moved, running
repair from any worktree with each tree’s new <path> as an
argument, will reestablish the connection to all the
specified paths.
If both the main worktree and linked worktrees have been
moved manually, then running repair in the main worktree and
specifying the new <path> of each linked worktree will
reestablish all connections in both directions.
unlock
Unlock a worktree, allowing it to be pruned, moved or
deleted.
OPTIONS
-f, --force
By default, add refuses to create a new worktree when
<commit-ish> is a branch name and is already checked out by
another worktree, or if <path> is already assigned to some
worktree but is missing (for instance, if <path> was deleted
manually). This option overrides these safeguards. To add a
missing but locked worktree path, specify --force twice.
move refuses to move a locked worktree unless --force is
specified twice. If the destination is already assigned to
some other worktree but is missing (for instance, if
<new-path> was deleted manually), then --force allows the
move to proceed; use --force twice if the destination is
locked.
remove refuses to remove an unclean worktree unless --force
is used. To remove a locked worktree, specify --force twice.
-b <new-branch>, -B <new-branch>
With add, create a new branch named <new-branch> starting at
<commit-ish>, and check out <new-branch> into the new
worktree. If <commit-ish> is omitted, it defaults to HEAD. By
default, -b refuses to create a new branch if it already
exists. -B overrides this safeguard, resetting <new-branch>
to <commit-ish>.
-d, --detach
With add, detach HEAD in the new worktree. See "DETACHED
HEAD" in git-checkout(1).
--[no-]checkout
By default, add checks out <commit-ish>, however,
--no-checkout can be used to suppress checkout in order to
make customizations, such as configuring sparse-checkout. See
"Sparse checkout" in git-read-tree(1).
--[no-]guess-remote
With worktree add <path>, without <commit-ish>, instead of
creating a new branch from HEAD, if there exists a tracking
branch in exactly one remote matching the basename of <path>,
base the new branch on the remote-tracking branch, and mark
the remote-tracking branch as "upstream" from the new branch.
This can also be set up as the default behaviour by using the
worktree.guessRemote config option.
--[no-]track
When creating a new branch, if <commit-ish> is a branch, mark
it as "upstream" from the new branch. This is the default if
<commit-ish> is a remote-tracking branch. See --track in
git-branch(1) for details.
--lock
Keep the worktree locked after creation. This is the
equivalent of git worktree lock after git worktree add, but
without a race condition.
-n, --dry-run
With prune, do not remove anything; just report what it would
remove.
--orphan
With add, make the new worktree and index empty, associating
the worktree with a new unborn branch named <new-branch>.
--porcelain
With list, output in an easy-to-parse format for scripts.
This format will remain stable across Git versions and
regardless of user configuration. It is recommended to
combine this with -z. See below for details.
-z
Terminate each line with a NUL rather than a newline when
--porcelain is specified with list. This makes it possible to
parse the output when a worktree path contains a newline
character.
-q, --quiet
With add, suppress feedback messages.
-v, --verbose
With prune, report all removals.
With list, output additional information about worktrees (see
below).
--expire <time>
With prune, only expire unused worktrees older than <time>.
With list, annotate missing worktrees as prunable if they are
older than <time>.
--reason <string>
With lock or with add --lock, an explanation why the worktree
is locked.
<worktree>
Worktrees can be identified by path, either relative or
absolute.
If the last path components in the worktree’s path is unique
among worktrees, it can be used to identify a worktree. For
example if you only have two worktrees, at /abc/def/ghi and
/abc/def/ggg, then ghi or def/ghi is enough to point to the
former worktree.
REFS
When using multiple worktrees, some refs are shared between all
worktrees, but others are specific to an individual worktree. One
example is HEAD, which is different for each worktree. This
section is about the sharing rules and how to access refs of one
worktree from another.
In general, all pseudo refs are per-worktree and all refs
starting with refs/ are shared. Pseudo refs are ones like HEAD
which are directly under $GIT_DIR instead of inside
$GIT_DIR/refs. There are exceptions, however: refs inside
refs/bisect, refs/worktree and refs/rewritten are not shared.
Refs that are per-worktree can still be accessed from another
worktree via two special paths, main-worktree and worktrees. The
former gives access to per-worktree refs of the main worktree,
while the latter to all linked worktrees.
For example, main-worktree/HEAD or main-worktree/refs/bisect/good
resolve to the same value as the main worktree’s HEAD and
refs/bisect/good respectively. Similarly, worktrees/foo/HEAD or
worktrees/bar/refs/bisect/bad are the same as
$GIT_COMMON_DIR/worktrees/foo/HEAD and
$GIT_COMMON_DIR/worktrees/bar/refs/bisect/bad.
To access refs, it’s best not to look inside $GIT_DIR directly.
Instead use commands such as git-rev-parse(1) or
git-update-ref(1) which will handle refs correctly.
CONFIGURATION FILE
By default, the repository config file is shared across all
worktrees. If the config variables core.bare or core.worktree are
present in the common config file and extensions.worktreeConfig
is disabled, then they will be applied to the main worktree only.
In order to have worktree-specific configuration, you can turn on
the worktreeConfig extension, e.g.:
$ git config extensions.worktreeConfig true
In this mode, specific configuration stays in the path pointed by
git rev-parse --git-path config.worktree. You can add or update
configuration in this file with git config --worktree. Older Git
versions will refuse to access repositories with this extension.
Note that in this file, the exception for core.bare and
core.worktree is gone. If they exist in $GIT_DIR/config, you must
move them to the config.worktree of the main worktree. You may
also take this opportunity to review and move other configuration
that you do not want to share to all worktrees:
• core.worktree should never be shared.
• core.bare should not be shared if the value is
core.bare=true.
• core.sparseCheckout should not be shared, unless you are sure
you always use sparse checkout for all worktrees.
See the documentation of extensions.worktreeConfig in
git-config(1) for more details.
DETAILS
Each linked worktree has a private sub-directory in the
repository’s $GIT_DIR/worktrees directory. The private
sub-directory’s name is usually the base name of the linked
worktree’s path, possibly appended with a number to make it
unique. For example, when $GIT_DIR=/path/main/.git the command
git worktree add /path/other/test-next next creates the linked
worktree in /path/other/test-next and also creates a
$GIT_DIR/worktrees/test-next directory (or
$GIT_DIR/worktrees/test-next1 if test-next is already taken).
Within a linked worktree, $GIT_DIR is set to point to this
private directory (e.g. /path/main/.git/worktrees/test-next in
the example) and $GIT_COMMON_DIR is set to point back to the main
worktree’s $GIT_DIR (e.g. /path/main/.git). These settings are
made in a .git file located at the top directory of the linked
worktree.
Path resolution via git rev-parse --git-path uses either $GIT_DIR
or $GIT_COMMON_DIR depending on the path. For example, in the
linked worktree git rev-parse --git-path HEAD returns
/path/main/.git/worktrees/test-next/HEAD (not
/path/other/test-next/.git/HEAD or /path/main/.git/HEAD) while
git rev-parse --git-path refs/heads/master uses $GIT_COMMON_DIR
and returns /path/main/.git/refs/heads/master, since refs are
shared across all worktrees, except refs/bisect, refs/worktree
and refs/rewritten.
See gitrepository-layout(5) for more information. The rule of
thumb is do not make any assumption about whether a path belongs
to $GIT_DIR or $GIT_COMMON_DIR when you need to directly access
something inside $GIT_DIR. Use git rev-parse --git-path to get
the final path.
If you manually move a linked worktree, you need to update the
gitdir file in the entry’s directory. For example, if a linked
worktree is moved to /newpath/test-next and its .git file points
to /path/main/.git/worktrees/test-next, then update
/path/main/.git/worktrees/test-next/gitdir to reference
/newpath/test-next instead. Better yet, run git worktree repair
to reestablish the connection automatically.
To prevent a $GIT_DIR/worktrees entry from being pruned (which
can be useful in some situations, such as when the entry’s
worktree is stored on a portable device), use the git worktree
lock command, which adds a file named locked to the entry’s
directory. The file contains the reason in plain text. For
example, if a linked worktree’s .git file points to
/path/main/.git/worktrees/test-next then a file named
/path/main/.git/worktrees/test-next/locked will prevent the
test-next entry from being pruned. See gitrepository-layout(5)
for details.
When extensions.worktreeConfig is enabled, the config file
.git/worktrees/<id>/config.worktree is read after .git/config is.
LIST OUTPUT FORMAT
The worktree list command has two output formats. The default
format shows the details on a single line with columns. For
example:
$ git worktree list
/path/to/bare-source (bare)
/path/to/linked-worktree abcd1234 [master]
/path/to/other-linked-worktree 1234abc (detached HEAD)
The command also shows annotations for each worktree, according
to its state. These annotations are:
• locked, if the worktree is locked.
• prunable, if the worktree can be pruned via git worktree
prune.
$ git worktree list
/path/to/linked-worktree abcd1234 [master]
/path/to/locked-worktree acbd5678 (brancha) locked
/path/to/prunable-worktree 5678abc (detached HEAD) prunable
For these annotations, a reason might also be available and this
can be seen using the verbose mode. The annotation is then moved
to the next line indented followed by the additional information.
$ git worktree list --verbose
/path/to/linked-worktree abcd1234 [master]
/path/to/locked-worktree-no-reason abcd5678 (detached HEAD) locked
/path/to/locked-worktree-with-reason 1234abcd (brancha)
locked: worktree path is mounted on a portable device
/path/to/prunable-worktree 5678abc1 (detached HEAD)
prunable: gitdir file points to non-existent location
Note that the annotation is moved to the next line if the
additional information is available, otherwise it stays on the
same line as the worktree itself.
Porcelain Format
The porcelain format has a line per attribute. If -z is given
then the lines are terminated with NUL rather than a newline.
Attributes are listed with a label and value separated by a
single space. Boolean attributes (like bare and detached) are
listed as a label only, and are present only if the value is
true. Some attributes (like locked) can be listed as a label only
or with a value depending upon whether a reason is available. The
first attribute of a worktree is always worktree, an empty line
indicates the end of the record. For example:
$ git worktree list --porcelain
worktree /path/to/bare-source
bare
worktree /path/to/linked-worktree
HEAD abcd1234abcd1234abcd1234abcd1234abcd1234
branch refs/heads/master
worktree /path/to/other-linked-worktree
HEAD 1234abc1234abc1234abc1234abc1234abc1234a
detached
worktree /path/to/linked-worktree-locked-no-reason
HEAD 5678abc5678abc5678abc5678abc5678abc5678c
branch refs/heads/locked-no-reason
locked
worktree /path/to/linked-worktree-locked-with-reason
HEAD 3456def3456def3456def3456def3456def3456b
branch refs/heads/locked-with-reason
locked reason why is locked
worktree /path/to/linked-worktree-prunable
HEAD 1233def1234def1234def1234def1234def1234b
detached
prunable gitdir file points to non-existent location
Unless -z is used any "unusual" characters in the lock reason
such as newlines are escaped and the entire reason is quoted as
explained for the configuration variable core.quotePath (see
git-config(1)). For Example:
$ git worktree list --porcelain
...
locked "reason\nwhy is locked"
...
EXAMPLES
You are in the middle of a refactoring session and your boss
comes in and demands that you fix something immediately. You
might typically use git-stash(1) to store your changes away
temporarily, however, your working tree is in such a state of
disarray (with new, moved, and removed files, and other bits and
pieces strewn around) that you don’t want to risk disturbing any
of it. Instead, you create a temporary linked worktree to make
the emergency fix, remove it when done, and then resume your
earlier refactoring session.
$ git worktree add -b emergency-fix ../temp master
$ pushd ../temp
# ... hack hack hack ...
$ git commit -a -m 'emergency fix for boss'
$ popd
$ git worktree remove ../temp
BUGS
Multiple checkout in general is still experimental, and the
support for submodules is incomplete. It is NOT recommended to
make multiple checkouts of a superproject.
GIT
Part of the git(1) suite
COLOPHON
This page is part of the git (Git distributed version control
system) project. Information about the project can be found at
⟨http://git-scm.com/⟩. If you have a bug report for this manual
page, see ⟨http://git-scm.com/community⟩. This page was obtained
from the project's upstream Git repository
⟨https://github.com/git/git.git⟩ on 2024-06-14. (At that time,
the date of the most recent commit that was found in the
repository was 2024-06-12.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
Git 2.45.2.492.gd63586 2024-06-12 GIT-WORKTREE(1)
Pages that refer to this page: git(1), git-checkout(1), git-config(1), git-log(1), git-replay(1), git-rev-list(1), git-shortlog(1), git-sparse-checkout(1), git-switch(1), gitrepository-layout(5), gitglossary(7)