udaddy(1) — Linux manual page

UDADDY(1)                       librdmacm                      UDADDY(1)

NAME

       udaddy - RDMA CM datagram setup and simple ping-pong test.

SYNOPSIS

       udaddy [-s server_address] [-b bind_address] [-c connections]
                 [-C message_count] [-S message_size] [-p port_space]
       udaddy -s server_address [-b bind_address] [-c connections]
                 [-C message_count] [-S message_size] [-t tos] [-p port_space]

DESCRIPTION

       Establishes a set of unreliable RDMA datagram communication paths
       between two nodes using the librdmacm, optionally transfers
       datagrams between the nodes, then tears down the communication.

OPTIONS

       -s server_address
              The network name or IP address of the server system
              listening for communication.  The used name or address
              must route over an RDMA device.  This option must be
              specified by the client.

       -b bind_address
              The local network address to bind to.  To bind to any
              address with IPv6 use -b ::0 .

       -c connections
              The number of communication paths to establish between the
              client and server.  The test uses unreliable datagram
              communication, so no actual connections are formed.
              (default 1)

       -C message_count
              The number of messages to transfer over each connection.
              (default 10)

       -S message_size
              The size of each message transferred, in bytes.  This
              value must be smaller than the MTU of the underlying RDMA
              transport, or an error will occur.  (default 100)

       -t tos Indicates the type of service used for the communication.
              Type of service is implementation dependent based on
              subnet configuration.

       -p port_space
              The port space of the datagram communication.  May be
              either the RDMA UDP (0x0111) or IPoIB (0x0002) port space.
              (default RDMA_PS_UDP)

NOTES

       Basic usage is to start udaddy on a server system, then run
       udaddy -s server_name on a client system.

       Because this test maps RDMA resources to userspace, users must
       ensure that they have available system resources and permissions.
       See the libibverbs README file for additional details.

SEE ALSO

       rdma_cm(7), ucmatose(1), mckey(1), rping(1)

COLOPHON

       This page is part of the rdma-core (RDMA Core Userspace Libraries
       and Daemons) project.  Information about the project can be found
       at ⟨https://github.com/linux-rdma/rdma-core⟩.  If you have a bug
       report for this manual page, send it to
       linux-rdma@vger.kernel.org.  This page was obtained from the
       project's upstream Git repository
       ⟨https://github.com/linux-rdma/rdma-core.git⟩ on 2024-06-14.  (At
       that time, the date of the most recent commit that was found in
       the repository was 2024-06-10.)  If you discover any rendering
       problems in this HTML version of the page, or you believe there
       is a better or more up-to-date source for the page, or you have
       corrections or improvements to the information in this COLOPHON
       (which is not part of the original manual page), send a mail to
       man-pages@man7.org

librdmacm                      2007-05-15                      UDADDY(1)

Pages that refer to this page: mckey(1), rdma_client(1), rdma_server(1), rdma_xclient(1), rdma_xserver(1), rping(1), ucmatose(1), rdma_cm(7)

---