pthread_cond_init(3) — Linux manual page
pthread_cond_init(3) Library Functions Manual pthread_cond_init(3)
NAME
pthread_cond_init, pthread_cond_signal, pthread_cond_broadcast,
pthread_cond_wait, pthread_cond_timedwait, pthread_cond_destroy -
operations on conditions
SYNOPSIS
#include <pthread.h>
pthread_cond_t cond = PTHREAD_COND_INITIALIZER;
int pthread_cond_init(pthread_cond_t *cond,
pthread_condattr_t *cond_attr);
int pthread_cond_signal(pthread_cond_t *cond);
int pthread_cond_broadcast(pthread_cond_t *cond);
int pthread_cond_wait(pthread_cond_t *cond, pthread_mutex_t *mutex);
int pthread_cond_timedwait(pthread_cond_t *cond, pthread_mutex_t *mutex,
const struct timespec *abstime);
int pthread_cond_destroy(pthread_cond_t *cond);
DESCRIPTION
A condition (short for ``condition variable'') is a
synchronization device that allows threads to suspend execution
and relinquish the processors until some predicate on shared data
is satisfied. The basic operations on conditions are: signal the
condition (when the predicate becomes true), and wait for the
condition, suspending the thread execution until another thread
signals the condition.
A condition variable must always be associated with a mutex, to
avoid the race condition where a thread prepares to wait on a
condition variable and another thread signals the condition just
before the first thread actually waits on it.
pthread_cond_init initializes the condition variable cond, using
the condition attributes specified in cond_attr, or default
attributes if cond_attr is NULL. The LinuxThreads implementation
supports no attributes for conditions, hence the cond_attr
parameter is actually ignored.
Variables of type pthread_cond_t can also be initialized
statically, using the constant PTHREAD_COND_INITIALIZER.
pthread_cond_signal restarts one of the threads that are waiting
on the condition variable cond. If no threads are waiting on
cond, nothing happens. If several threads are waiting on cond,
exactly one is restarted, but it is not specified which.
pthread_cond_broadcast restarts all the threads that are waiting
on the condition variable cond. Nothing happens if no threads
are waiting on cond.
pthread_cond_wait atomically unlocks the mutex (as per
pthread_unlock_mutex) and waits for the condition variable cond
to be signaled. The thread execution is suspended and does not
consume any CPU time until the condition variable is signaled.
The mutex must be locked by the calling thread on entrance to
pthread_cond_wait. Before returning to the calling thread,
pthread_cond_wait re-acquires mutex (as per pthread_lock_mutex).
Unlocking the mutex and suspending on the condition variable is
done atomically. Thus, if all threads always acquire the mutex
before signaling the condition, this guarantees that the
condition cannot be signaled (and thus ignored) between the time
a thread locks the mutex and the time it waits on the condition
variable.
pthread_cond_timedwait atomically unlocks mutex and waits on
cond, as pthread_cond_wait does, but it also bounds the duration
of the wait. If cond has not been signaled within the amount of
time specified by abstime, the mutex mutex is re-acquired and
pthread_cond_timedwait returns the error ETIMEDOUT. The abstime
parameter specifies an absolute time, with the same origin as
time(2) and gettimeofday(2): an abstime of 0 corresponds to
00:00:00 GMT, January 1, 1970.
pthread_cond_destroy destroys a condition variable, freeing the
resources it might hold. No threads must be waiting on the
condition variable on entrance to pthread_cond_destroy. In the
LinuxThreads implementation, no resources are associated with
condition variables, thus pthread_cond_destroy actually does
nothing except checking that the condition has no waiting
threads.
CANCELLATION
pthread_cond_wait and pthread_cond_timedwait are cancelation
points. If a thread is cancelled while suspended in one of these
functions, the thread immediately resumes execution, then locks
again the mutex argument to pthread_cond_wait and
pthread_cond_timedwait, and finally executes the cancelation.
Consequently, cleanup handlers are assured that mutex is locked
when they are called.
ASYNC-SIGNAL SAFETY
The condition functions are not async-signal safe, and should not
be called from a signal handler. In particular, calling
pthread_cond_signal or pthread_cond_broadcast from a signal
handler may deadlock the calling thread.
RETURN VALUE
All condition variable functions return 0 on success and a non-
zero error code on error.
ERRORS
pthread_cond_init, pthread_cond_signal, pthread_cond_broadcast,
and pthread_cond_wait never return an error code.
The pthread_cond_timedwait function returns the following error
codes on error:
ETIMEDOUT
The condition variable was not signaled until the
timeout specified by abstime.
EINTR pthread_cond_timedwait was interrupted by a signal.
The pthread_cond_destroy function returns the following error
code on error:
EBUSY Some threads are currently waiting on cond.
SEE ALSO
pthread_condattr_init(3), pthread_mutex_lock(3),
pthread_mutex_unlock(3), gettimeofday(2), nanosleep(2).
EXAMPLE
Consider two shared variables x and y, protected by the mutex
mut, and a condition variable cond that is to be signaled
whenever x becomes greater than y.
int x,y;
pthread_mutex_t mut = PTHREAD_MUTEX_INITIALIZER;
pthread_cond_t cond = PTHREAD_COND_INITIALIZER;
Waiting until x is greater than y is performed as follows:
pthread_mutex_lock(&mut);
while (x <= y) {
pthread_cond_wait(&cond, &mut);
}
/* operate on x and y */
pthread_mutex_unlock(&mut);
Modifications on x and y that may cause x to become greater than
y should signal the condition if needed:
pthread_mutex_lock(&mut);
/* modify x and y */
if (x > y) pthread_cond_broadcast(&cond);
pthread_mutex_unlock(&mut);
If it can be proved that at most one waiting thread needs to be
waken up (for instance, if there are only two threads
communicating through x and y), pthread_cond_signal can be used
as a slightly more efficient alternative to
pthread_cond_broadcast. In doubt, use pthread_cond_broadcast.
To wait for x to become greater than y with a timeout of 5
seconds, do:
struct timeval now;
struct timespec timeout;
int retcode;
pthread_mutex_lock(&mut);
gettimeofday(&now);
timeout.tv_sec = now.tv_sec + 5;
timeout.tv_nsec = now.tv_usec * 1000;
retcode = 0;
while (x <= y && retcode != ETIMEDOUT) {
retcode = pthread_cond_timedwait(&cond, &mut, &timeout);
}
if (retcode == ETIMEDOUT) {
/* timeout occurred */
} else {
/* operate on x and y */
}
pthread_mutex_unlock(&mut);
COLOPHON
This page is part of the man-pages (Linux kernel and C library
user-space interface documentation) project. Information about
the project can be found at
⟨https://www.kernel.org/doc/man-pages/⟩. If you have a bug report
for this manual page, see
⟨https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/tree/CONTRIBUTING⟩.
This page was obtained from the tarball man-pages-6.9.1.tar.gz
fetched from
⟨https://mirrors.edge.kernel.org/pub/linux/docs/man-pages/⟩ on
2024-06-26. If you discover any rendering problems in this HTML
version of the page, or you believe there is a better or more up-
to-date source for the page, or you have corrections or
improvements to the information in this COLOPHON (which is not
part of the original manual page), send a mail to
man-pages@man7.org
Linux man-pages 6.9.1 2024-06-16 pthread_cond_init(3)
Pages that refer to this page: futex(2), PR_SET_TIMERSLACK(2const), pthread_condattr_init(3), pthreads(7), signal(7)