stdio(3) — Linux manual page
stdio(3) Library Functions Manual stdio(3)
NAME
stdio - standard input/output library functions
LIBRARY
Standard C library (libc, -lc)
SYNOPSIS
#include <stdio.h>
FILE *stdin;
FILE *stdout;
FILE *stderr;
DESCRIPTION
The standard I/O library provides a simple and efficient buffered
stream I/O interface. Input and output is mapped into logical
data streams and the physical I/O characteristics are concealed.
The functions and macros are listed below; more information is
available from the individual man pages.
A stream is associated with an external file (which may be a
physical device) by opening a file, which may involve creating a
new file. Creating an existing file causes its former contents
to be discarded. If a file can support positioning requests
(such as a disk file, as opposed to a terminal), then a file
position indicator associated with the stream is positioned at
the start of the file (byte zero), unless the file is opened with
append mode. If append mode is used, it is unspecified whether
the position indicator will be placed at the start or the end of
the file. The position indicator is maintained by subsequent
reads, writes, and positioning requests. All input occurs as if
the characters were read by successive calls to the fgetc(3)
function; all output takes place as if all characters were
written by successive calls to the fputc(3) function.
A file is disassociated from a stream by closing the file.
Output streams are flushed (any unwritten buffer contents are
transferred to the host environment) before the stream is
disassociated from the file. The value of a pointer to a FILE
object is indeterminate after a file is closed (garbage).
A file may be subsequently reopened, by the same or another
program execution, and its contents reclaimed or modified (if it
can be repositioned at the start). If the main function returns
to its original caller, or the exit(3) function is called, all
open files are closed (hence all output streams are flushed)
before program termination. Other methods of program
termination, such as abort(3) do not bother about closing files
properly.
At program startup, three text streams are predefined and need
not be opened explicitly: standard input (for reading
conventional input), standard output (for writing conventional
output), and standard error (for writing diagnostic output).
These streams are abbreviated stdin, stdout, and stderr. When
opened, the standard error stream is not fully buffered; the
standard input and output streams are fully buffered if and only
if the streams do not refer to an interactive device.
Output streams that refer to terminal devices are always line
buffered by default; pending output to such streams is written
automatically whenever an input stream that refers to a terminal
device is read. In cases where a large amount of computation is
done after printing part of a line on an output terminal, it is
necessary to fflush(3) the standard output before going off and
computing so that the output will appear.
The stdio library is a part of the library libc and routines are
automatically loaded as needed by cc(1). The SYNOPSIS sections
of the following manual pages indicate which include files are to
be used, what the compiler declaration for the function looks
like and which external variables are of interest.
The following are defined as macros; these names may not be
reused without first removing their current definitions with
#undef: BUFSIZ, EOF, FILENAME_MAX, FOPEN_MAX, L_cuserid,
L_ctermid, L_tmpnam, NULL, SEEK_END, SEEK_SET, SEEK_CUR, TMP_MAX,
clearerr, feof, ferror, fileno, getc, getchar, putc, putchar,
stderr, stdin, stdout. Function versions of the macro functions
feof, ferror, clearerr, fileno, getc, getchar, putc, and putchar
exist and will be used if the macros definitions are explicitly
removed.
List of functions
Function Description
──────────────────────────────────────────────────────────────────
clearerr(3) check and reset stream status
fclose(3) close a stream
fdopen(3) stream open functions
feof(3) check and reset stream status
ferror(3) check and reset stream status
fflush(3) flush a stream
fgetc(3) get next character or word from input stream
fgetpos(3) reposition a stream
fgets(3) get a line from a stream
fileno(3) return the integer descriptor of the
argument stream
fmemopen(3) open memory as stream
fopen(3) stream open functions
fopencookie(3) open a custom stream
fprintf(3) formatted output conversion
fpurge(3) flush a stream
fputc(3) output a character or word to a stream
fputs(3) output a line to a stream
fread(3) binary stream input/output
freopen(3) stream open functions
fscanf(3) input format conversion
fseek(3) reposition a stream
fsetpos(3) reposition a stream
ftell(3) reposition a stream
fwrite(3) binary stream input/output
getc(3) get next character or word from input stream
getchar(3) get next character or word from input stream
gets(3) get a line from a stream
getw(3) get next character or word from input stream
mktemp(3) make temporary filename (unique)
open_memstream(3) open a dynamic memory buffer stream
open_wmemstream(3) open a dynamic memory buffer stream
perror(3) system error messages
printf(3) formatted output conversion
putc(3) output a character or word to a stream
putchar(3) output a character or word to a stream
puts(3) output a line to a stream
putw(3) output a character or word to a stream
remove(3) remove directory entry
rewind(3) reposition a stream
scanf(3) input format conversion
setbuf(3) stream buffering operations
setbuffer(3) stream buffering operations
setlinebuf(3) stream buffering operations
setvbuf(3) stream buffering operations
sprintf(3) formatted output conversion
sscanf(3) input format conversion
strerror(3) system error messages
sys_errlist(3) system error messages
sys_nerr(3) system error messages
tempnam(3) temporary file routines
tmpfile(3) temporary file routines
tmpnam(3) temporary file routines
ungetc(3) un-get character from input stream
vfprintf(3) formatted output conversion
vfscanf(3) input format conversion
vprintf(3) formatted output conversion
vscanf(3) input format conversion
vsprintf(3) formatted output conversion
vsscanf(3) input format conversion
STANDARDS
C11, POSIX.1-2008.
HISTORY
C89, POSIX.1-2001.
SEE ALSO
close(2), open(2), read(2), write(2), stdout(3),
unlocked_stdio(3)
COLOPHON
This page is part of the man-pages (Linux kernel and C library
user-space interface documentation) project. Information about
the project can be found at
⟨https://www.kernel.org/doc/man-pages/⟩. If you have a bug report
for this manual page, see
⟨https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/tree/CONTRIBUTING⟩.
This page was obtained from the tarball man-pages-6.9.1.tar.gz
fetched from
⟨https://mirrors.edge.kernel.org/pub/linux/docs/man-pages/⟩ on
2024-06-26. If you discover any rendering problems in this HTML
version of the page, or you believe there is a better or more up-
to-date source for the page, or you have corrections or
improvements to the information in this COLOPHON (which is not
part of the original manual page), send a mail to
man-pages@man7.org
Linux man-pages 6.9.1 2024-05-02 stdio(3)
Pages that refer to this page: pmsnap(1), _exit(2), fcntl(2), vfork(2), curs_addch(3x), exit(3), ferror(3), FILE(3type), fileno(3), popen(3), printf(3), stdin(3), unlocked_stdio(3), scr_dump(5)