tmpfiles.d(5) — Linux manual page
TMPFILES.D(5) tmpfiles.d TMPFILES.D(5)
NAME
tmpfiles.d - Configuration for creation, deletion, and cleaning
of files and directories
SYNOPSIS
/etc/tmpfiles.d/*.conf
/run/tmpfiles.d/*.conf
/usr/local/lib/tmpfiles.d/*.conf
/usr/lib/tmpfiles.d/*.conf
~/.config/user-tmpfiles.d/*.conf
$XDG_RUNTIME_DIR/user-tmpfiles.d/*.conf
~/.local/share/user-tmpfiles.d/*.conf
...
/usr/local/share/user-tmpfiles.d/*.conf
/usr/share/user-tmpfiles.d/*.conf
#Type Path Mode User Group Age Argument
f /file/to/create mode user group - content
f+ /file/to/create-or-truncate mode user group - content
w /file/to/write-to - - - - content
w+ /file/to/append-to - - - - content
d /directory/to/create-and-clean-up mode user group cleanup-age -
D /directory/to/create-and-remove mode user group cleanup-age -
e /directory/to/clean-up mode user group cleanup-age -
v /subvolume-or-directory/to/create mode user group cleanup-age -
q /subvolume-or-directory/to/create mode user group cleanup-age -
Q /subvolume-or-directory/to/create mode user group cleanup-age -
p /fifo/to/create mode user group - -
p+ /fifo/to/[re]create mode user group - -
L /symlink/to/create - - - - symlink/target/path
L+ /symlink/to/[re]create - - - - symlink/target/path
c /dev/char-device-to-create mode user group - major:minor
c+ /dev/char-device-to-[re]create mode user group - major:minor
b /dev/block-device-to-create mode user group - major:minor
b+ /dev/block-device-to-[re]create mode user group - major:minor
C /target/to/create - - - cleanup-age /source/to/copy
C+ /target/to/create - - - cleanup-age /source/to/copy
x /path-or-glob/to/ignore/recursively - - - cleanup-age -
X /path-or-glob/to/ignore - - - cleanup-age -
r /path-or-glob/to/remove - - - - -
R /path-or-glob/to/remove/recursively - - - - -
z /path-or-glob/to/adjust/mode mode user group - -
Z /path-or-glob/to/adjust/mode/recursively mode user group - -
t /path-or-glob/to/set/xattrs - - - - xattrs
T /path-or-glob/to/set/xattrs/recursively - - - - xattrs
h /path-or-glob/to/set/attrs - - - - file attrs
H /path-or-glob/to/set/attrs/recursively - - - - file attrs
a /path-or-glob/to/set/acls - - - - POSIX ACLs
a+ /path-or-glob/to/append/acls - - - - POSIX ACLs
A /path-or-glob/to/set/acls/recursively - - - - POSIX ACLs
A+ /path-or-glob/to/append/acls/recursively - - - - POSIX ACLs
DESCRIPTION
tmpfiles.d configuration files provide a generic mechanism to
define the creation of regular files, directories, pipes, and
device nodes, adjustments to their access mode, ownership,
attributes, quota assignments, and contents, and finally their
time-based removal. It is mostly commonly used for volatile and
temporary files and directories (such as those located under
/run/, /tmp/, /var/tmp/, the API file systems such as /sys/ or
/proc/, as well as some other directories below /var/).
systemd-tmpfiles(8) uses this configuration to create volatile
files and directories during boot and to do periodic cleanup
afterwards. See systemd-tmpfiles(8) for the description of
systemd-tmpfiles-setup.service, systemd-tmpfiles-clean.service,
and associated units.
System daemons frequently require private runtime directories
below /run/ to store communication sockets and similar. For
these, it is better to use RuntimeDirectory= in their unit files
(see systemd.exec(5) for details), if the flexibility provided by
tmpfiles.d is not required. The advantages are that the
configuration required by the unit is centralized in one place,
and that the lifetime of the directory is tied to the lifetime of
the service itself. Similarly, StateDirectory=, CacheDirectory=,
LogsDirectory=, and ConfigurationDirectory= should be used to
create directories under /var/lib/, /var/cache/, /var/log/, and
/etc/. tmpfiles.d should be used for files whose lifetime is
independent of any service or requires more complicated
configuration.
CONFIGURATION DIRECTORIES AND PRECEDENCE
Each configuration file shall be named in the style of
package.conf or package-part.conf. The second variant should be
used when it is desirable to make it easy to override just this
part of configuration.
Files in /etc/tmpfiles.d override files with the same name in
/usr/lib/tmpfiles.d and /run/tmpfiles.d. Files in /run/tmpfiles.d
override files with the same name in /usr/lib/tmpfiles.d.
Packages should install their configuration files in
/usr/lib/tmpfiles.d. Files in /etc/tmpfiles.d are reserved for
the local administrator, who may use this logic to override the
configuration files installed by vendor packages. All
configuration files are sorted by their filename in lexicographic
order, regardless of which of the directories they reside in. If
multiple files specify the same path, the entry in the file with
the lexicographically earliest name will be applied (note that
lines suppressed due to the "!" are filtered before application,
meaning that if an early line carries the exclamation mark and is
suppressed because of that, a later line matching in path will be
applied). All other conflicting entries will be logged as errors.
When two lines are prefix path and suffix path of each other,
then the prefix line is always created first, the suffix later
(and if removal applies to the line, the order is reversed: the
suffix is removed first, the prefix later). Lines that take globs
are applied after those accepting no globs. If multiple
operations shall be applied on the same file (such as ACL, xattr,
file attribute adjustments), these are always done in the same
fixed order. Except for those cases, the files/directories are
processed in the order they are listed.
If the administrator wants to disable a configuration file
supplied by the vendor, the recommended way is to place a symlink
to /dev/null in /etc/tmpfiles.d/ bearing the same filename.
CONFIGURATION FILE FORMAT
The configuration format is one line per path, containing type,
path, mode, ownership, age, and argument fields. The lines are
separated by newlines, the fields by whitespace:
#Type Path Mode User Group Age Argument...
d /run/user 0755 root root 10d -
L /tmp/foobar - - - - /dev/null
Fields may contain C-style escapes. With the exception of the
seventh field (the "argument") all fields may be enclosed in
quotes. Note that any whitespace found in the line after the
beginning of the argument field will be considered part of the
argument field. To begin the argument field with a whitespace
character, use C-style escapes (e.g. "\x20").
Type
The type consists of a single letter and optionally one or more
modifier characters: a plus sign ("+"), exclamation mark ("!"),
minus sign ("-"), equals sign ("="), tilde character ("~") and/or
caret ("^").
The following line types are understood:
f, f+
f will create a file if it does not exist yet. If the
argument parameter is given and the file did not exist yet,
it will be written to the file. f+ will create or truncate
the file. If the argument parameter is given, it will be
written to the file. Does not follow symlinks.
w, w+
Write the argument parameter to a file, if the file exists.
If suffixed with +, the line will be appended to the file. If
your configuration writes multiple lines to the same file,
use w+. Lines of this type accept shell-style globs in place
of normal path names. The argument parameter will be written
without a trailing newline. C-style backslash escapes are
interpreted. Follows symlinks.
d
Create a directory. The mode and ownership will be adjusted
if specified. Contents of this directory are subject to
time-based cleanup if the age argument is specified.
D
Similar to d, but in addition the contents of the directory
will be removed when --remove is used.
e
Adjust the mode and ownership of existing directories and
remove their contents based on age. Lines of this type accept
shell-style globs in place of normal path names. Contents of
the directories are subject to time-based cleanup if the age
argument is specified. If the age argument is "0", contents
will be unconditionally deleted every time
systemd-tmpfiles(8) --clean is run.
For this entry to be useful, at least one of the mode, user,
group, or age arguments must be specified, since otherwise
this entry has no effect. As an exception, an entry with no
effect may be useful when combined with !, see the examples.
Added in version 230.
v
Create a subvolume if the path does not exist yet, the file
system supports subvolumes (btrfs), and the system itself is
installed into a subvolume (specifically: the root directory
/ is itself a subvolume). Otherwise, create a normal
directory, in the same way as d.
A subvolume created with this line type is not assigned to
any higher-level quota group. For that, use q or Q, which
allow creating simple quota group hierarchies, see below.
Added in version 219.
q
Create a subvolume or directory the same as v, but assign the
subvolume to the same higher-level quota groups as the
parent. This ensures that higher-level limits and accounting
applied to the parent subvolume also include the specified
subvolume. On non-btrfs file systems, this line type is
identical to d.
If the subvolume already exists, no change to the quota
hierarchy is made, regardless of whether the subvolume is
already attached to a quota group or not. Also see Q below.
See btrfs-qgroup(8) for details about the btrfs quota group
concept.
Added in version 228.
Q
Create the subvolume or directory the same as v, but assign
the new subvolume to a new leaf quota group. Instead of
copying the higher-level quota group assignments from the
parent as is done with q, the lowest quota group of the
parent subvolume is determined that is not the leaf quota
group. Then, an "intermediary" quota group is inserted that
is one level below this level, and shares the same ID part as
the specified subvolume. If no higher-level quota group
exists for the parent subvolume, a new quota group at level
255 sharing the same ID as the specified subvolume is
inserted instead. This new intermediary quota group is then
assigned to the parent subvolume's higher-level quota groups,
and the specified subvolume's leaf quota group is assigned to
it.
Effectively, this has a similar effect as q, however
introduces a new higher-level quota group for the specified
subvolume that may be used to enforce limits and accounting
to the specified subvolume and children subvolume created
within it. Thus, by creating subvolumes only via q and Q, a
concept of "subtree quotas" is implemented. Each subvolume
for which Q is set will get a "subtree" quota group created,
and all child subvolumes created within it will be assigned
to it. Each subvolume for which q is set will not get such a
"subtree" quota group, but it is ensured that they are added
to the same "subtree" quota group as their immediate parents.
It is recommended to use Q for subvolumes that typically
contain further subvolumes, and where it is desirable to have
accounting and quota limits on all child subvolumes together.
Examples for Q are typically /home/ or /var/lib/machines/. In
contrast, q should be used for subvolumes that either usually
do not include further subvolumes or where no accounting and
quota limits are needed that apply to all child subvolumes
together. Examples for q are typically /var/ or /var/tmp/.
As with q, Q has no effect on the quota group hierarchy if
the subvolume already exists, regardless of whether the
subvolume already belong to a quota group or not.
Added in version 228.
p, p+
Create a named pipe (FIFO) if it does not exist yet. If
suffixed with + and a file already exists where the pipe is
to be created, it will be removed and be replaced by the
pipe.
L, L+
Create a symlink if it does not exist yet. If suffixed with +
and a file or directory already exists where the symlink is
to be created, it will be removed and be replaced by the
symlink. If the argument is omitted, symlinks to files with
the same name residing in the directory /usr/share/factory/
are created. Note that permissions and ownership on symlinks
are ignored.
c, c+
Create a character device node if it does not exist yet. If
suffixed with + and a file already exists where the device
node is to be created, it will be removed and be replaced by
the device node. It is recommended to suffix this entry with
an exclamation mark to only create static device nodes at
boot, as udev will not manage static device nodes that are
created at runtime.
b, b+
Create a block device node if it does not exist yet. If
suffixed with + and a file already exists where the device
node is to be created, it will be removed and be replaced by
the device node. It is recommended to suffix this entry with
an exclamation mark to only create static device nodes at
boot, as udev will not manage static device nodes that are
created at runtime.
C, C+
Recursively copy a file or directory, if the destination
files or directories do not exist yet or the destination
directory is empty. Note that this command will not descend
into subdirectories if the destination directory already
exists and is not empty, unless the action is suffixed with
+. Instead, the entire copy operation is skipped. If the
argument is omitted, files from the source directory
/usr/share/factory/ with the same name are copied. Does not
follow symlinks. Contents of the directories are subject to
time-based cleanup if the age argument is specified.
Added in version 214.
x
Ignore a path during cleaning. Use this type to exclude paths
from clean-up as controlled with the Age parameter. Lines of
this type accept shell-style globs in place of normal path
names.
X
Ignore a path during cleaning. Use this type to exclude paths
from clean-up as controlled with the Age parameter. Unlike x,
this parameter will not exclude the content if path is a
directory, but only directory itself. Lines of this type
accept shell-style globs in place of normal path names.
Added in version 198.
r
Remove a file or directory if it exists. This may not be used
to remove non-empty directories, use R for that. Lines of
this type accept shell-style globs in place of normal path
names. Does not follow symlinks.
R
Recursively remove a path and all its subdirectories (if it
is a directory). Lines of this type accept shell-style globs
in place of normal path names. Does not follow symlinks.
z
Adjust the access mode, user and group ownership, and restore
the SELinux security context of a file or directory, if it
exists. Lines of this type accept shell-style globs in place
of normal path names. Does not follow symlinks.
Z
Recursively set the access mode, user and group ownership,
and restore the SELinux security context of a file or
directory if it exists, as well as of its subdirectories and
the files contained therein (if applicable). Lines of this
type accept shell-style globs in place of normal path names.
Does not follow symlinks.
t
Set extended attributes, see attr(5) for details. The
argument field should take one or more assignment expressions
in the form namespace.attribute=value, for examples see
below. Lines of this type accept shell-style globs in place
of normal path names. This can be useful for setting SMACK
labels. Does not follow symlinks.
Please note that extended attributes settable with this line
type are a different concept from the Linux file attributes
settable with h/H, see below.
Added in version 218.
T
Same as t, but operates recursively.
Added in version 219.
h
Set Linux file/directory attributes. Lines of this type
accept shell-style globs in place of normal path names.
The format of the argument field is [+-=][aAcCdDeijPsStTu].
The prefix + (the default one) causes the attributes to be
added; - causes the attributes to be removed; = causes the
attributes to be set exactly as the following letters. The
letters "aAcCdDeijPsStTu" select the new attributes for the
files, see chattr(1) for further information.
Passing only = as argument resets all the file attributes
listed above. It has to be pointed out that the = prefix
limits itself to the attributes corresponding to the letters
listed here. All other attributes will be left untouched.
Does not follow symlinks.
Please note that the Linux file attributes settable with this
line type are a different concept from the extended
attributes settable with t/T, see above.
H
Sames as h, but operates recursively.
Added in version 220.
a, a+
Set POSIX ACLs (access control lists), see acl(5).
Additionally, if 'X' is used, the execute bit is set only if
the file is a directory or already has execute permission for
some user, as mentioned in setfacl(1). If suffixed with +,
the specified entries will be added to the existing set.
systemd-tmpfiles(8) will automatically add the required base
entries for user and group based on the access mode of the
file, unless base entries already exist or are explicitly
specified. The mask will be added if not specified explicitly
or already present. Lines of this type accept shell-style
globs in place of normal path names. This can be useful for
allowing additional access to certain files. Does not follow
symlinks.
Added in version 219.
A, A+
Same as a and a+, but recursive. Does not follow symlinks.
Added in version 219.
Type Modifiers
If the exclamation mark ("!") is used, this line is only safe to
execute during boot, and can break a running system. Lines
without the exclamation mark are presumed to be safe to execute
at any time, e.g. on package upgrades. systemd-tmpfiles(8) will
take lines with an exclamation mark only into consideration, if
the --boot option is given.
For example:
# Make sure these are created by default so that nobody else can
d /tmp/.X11-unix 1777 root root 10d
# Unlink the X11 lock files
r! /tmp/.X[0-9]*-lock
The second line in contrast to the first one would break a
running system, and will only be executed with --boot.
If the minus sign ("-") is used, this line failing to run
successfully during create (and only create) will not cause the
execution of systemd-tmpfiles to return an error.
For example:
# Modify sysfs but don't fail if we are in a container with a read-only /proc
w- /proc/sys/vm/swappiness - - - - 10
If the equals sign ("=") is used, the file types of existing
objects in the specified path are checked, and removed if they do
not match. This includes any implicitly created parent
directories (which can be either directories or directory
symlinks). For example, if there is a FIFO in place of one of the
parent path components it will be replaced with a directory.
If the tilde character ("~") is used, the argument (i.e. 6th)
column is Base64 decoded[1] before use. This modifier is only
supported on line types that can write file contents, i.e. f,
f+, w, +. This is useful for writing arbitrary binary data
(including newlines and NUL bytes) to files. Note that if this
switch is used, the argument is not subject to specifier
expansion, neither before nor after Base64 decoding.
If the caret character ("^") is used, the argument (i.e. 6th)
column takes a service credential name to read the argument data
from. See System and Service Credentials[2] for details about the
credentials concept. This modifier is only supported on line
types that can write file contents, i.e. f, f+, w, w+. This is
useful for writing arbitrary files with contents sourced from
elsewhere, including from VM or container managers further up. If
the specified credential is not set for the systemd-tmpfiles
service, the line is silently skipped. If "^" and "~" are
combined Base64 decoding is applied to the credential contents.
Note that for all line types that result in creation of any kind
of file node (i.e. f, d/D/v/q/Q, p, L, c/b and C) leading
directories are implicitly created if needed, owned by root with
an access mode of 0755. In order to create them with different
modes or ownership make sure to add appropriate d lines.
Path
The file system path specification supports simple specifier
expansion, see below. The path (after expansion) must be
absolute.
Mode
The file access mode to use when creating this file or directory.
If omitted or when set to "-", the default is used: 0755 for
directories, 0644 for all other file objects. For z, Z lines, if
omitted or when set to "-", the file access mode will not be
modified. This parameter is ignored for x, r, R, L, t, and a
lines.
Optionally, if prefixed with "~", the access mode is masked based
on the already set access bits for existing file or directories:
if the existing file has all executable bits unset, all
executable bits are removed from the new access mode, too.
Similarly, if all read bits are removed from the old access mode,
they will be removed from the new access mode too, and if all
write bits are removed, they will be removed from the new access
mode too. In addition, the sticky/SUID/SGID bit is removed unless
applied to a directory. This functionality is particularly useful
in conjunction with Z.
By default the access mode of listed inodes is set to the
specified mode regardless if it is created anew, or already
existed. Optionally, if prefixed with ":", the configured access
mode is only applied when creating new inodes, and if the inode
the line refers to already exists, its access mode is left in
place unmodified.
User, Group
The user and group to use for this file or directory. This may
either be a numeric ID or a user/group name. If omitted or when
set to "-", the user and group of the user who invokes
systemd-tmpfiles(8) is used. For z and Z lines, when omitted or
when set to "-", the file ownership will not be modified. These
parameters are ignored for x, r, R, L, t, and a lines.
This field should generally only reference system users/groups,
i.e. users/groups that are guaranteed to be resolvable during
early boot. If this field references users/groups that only
become resolveable during later boot (i.e. after NIS, LDAP or a
similar networked directory service become available), execution
of the operations declared by the line will likely fail. Also see
Notes on Resolvability of User and Group Names[3] for more
information on requirements on system user/group definitions.
By default the ownership of listed inodes is set to the specified
user/group regardless if it is created anew, or already existed.
Optionally, if prefixed with ":", the configured user/group
information is only applied when creating new inodes, and if the
inode the line refers to already exists, its user/group is left
in place unmodified.
Age
The date field, when set, is used to decide what files to delete
when cleaning. If a file or directory is older than the current
time minus the age field, it is deleted. The field format is a
series of integers each followed by one of the following suffixes
for the respective time units: s, m or min, h, d, w, ms, and us,
meaning seconds, minutes, hours, days, weeks, milliseconds, and
microseconds, respectively. Full names of the time units can be
used too.
If multiple integers and units are specified, the time values are
summed. If an integer is given without a unit, s is assumed.
When the age is set to zero, the files are cleaned
unconditionally.
The age field only applies to lines starting with d, D, e, v, q,
Q, C, x and X. If omitted or set to "-", no automatic clean-up is
done.
If the age field starts with a tilde character "~", clean-up is
only applied to files and directories one level inside the
directory specified, but not the files and directories
immediately inside it.
The age of a file system entry is determined from its last
modification timestamp (mtime), its last access timestamp
(atime), and (except for directories) its last status change
timestamp (ctime). By default, any of these three (or two) values
will prevent cleanup if it is more recent than the current time
minus the age field. To restrict the deletion based on particular
type of file timestamps, the age-by argument can be used.
The age-by argument overrides the timestamp types to be used for
the age check. It can be specified by prefixing the age argument
with a sequence of characters to specify the timestamp types and
a colon (":"): "age-by...:cleanup-age". The argument can consist
of a (A for directories), b (B for directories), c (C for
directories), or m (M for directories). Those respectively
indicate access, creation, last status change, and last
modification time of a file system entry. The lower-case letter
signifies that the given timestamp type should be considered for
files, while the upper-case letter signifies that the given
timestamp type should be considered for directories. See statx(2)
file timestamp fields for more details about timestamp types.
If not specified, the age-by field defaults to abcmABM, i.e. by
default all file timestamps are taken into consideration, with
the exception of the last status change timestamp (ctime) for
directories. This is because the aging logic itself will alter
the ctime whenever it deletes a file inside it. To ensure that
running the aging logic does not feed back into the next
iteration of itself, ctime for directories is ignored by default.
For example:
# Files created and modified, and directories accessed more than
# an hour ago in "/tmp/foo/bar", are subject to time-based cleanup.
d /tmp/foo/bar - - - bmA:1h -
Note that while the aging algorithm is run an exclusive BSD file
lock (see flock(2)) is taken on each directory/file the algorithm
decides to remove. If the aging algorithm finds a lock (shared or
exclusive) is already taken on some directory/file, it (and
everything below it) is skipped. Applications may use this to
temporarily exclude certain directory subtrees from the aging
algorithm: the applications can take a BSD file lock themselves,
and as long as they keep it aging of the directory/file and
everything below it is disabled.
This behavior can be used to ensure guaranteed cleanup of files
or directories whose lifetime should be aligned with the process
that created them by having that process create them in a
location monitored by systemd-tmpfiles with an age of "0", and
having the process immediately lock the directory or file before
using it. Because the BSD lock is process specific, the file is
guaranteed to be unlocked as soon as the process exits, meaning
that even if the process crashes, those files and directories
will be unlocked and cleaned up by systemd-tmpfiles.
Argument
For L lines determines the destination path of the symlink. For c
and b, determines the major/minor of the device node, with major
and minor formatted as integers, separated by ":", e.g. "1:3".
For f and w, the argument may be used to specify a short string
that is written to the file, suffixed by a newline. For C,
specifies the source file or directory. For t and T, determines
extended attributes to be set. For a and A, determines ACL
attributes to be set. For h and H, determines the file attributes
to set. Ignored for all other lines.
This field can contain specifiers, see below.
SPECIFIERS
Specifiers can be used in the "path" and "argument" fields. An
unknown or unresolvable specifier is treated as invalid
configuration. The following expansions are understood:
Table 1. Specifiers available
┌───────────┬────────────────────┬────────────────────────┐
│ Specifier │ Meaning │ Details │
├───────────┼────────────────────┼────────────────────────┤
│ "%a" │ Architecture │ A short string │
│ │ │ identifying the │
│ │ │ architecture of │
│ │ │ the local system. │
│ │ │ A string such as │
│ │ │ x86, x86-64 or │
│ │ │ arm64. See the │
│ │ │ architectures │
│ │ │ defined for │
│ │ │ ConditionArchitecture= │
│ │ │ in systemd.unit(5) │
│ │ │ for a full list. │
├───────────┼────────────────────┼────────────────────────┤
│ "%A" │ Operating system │ The operating system │
│ │ image version │ image version │
│ │ │ identifier of the │
│ │ │ running system, as │
│ │ │ read from the │
│ │ │ IMAGE_VERSION= field │
│ │ │ of /etc/os-release. If │
│ │ │ not set, resolves to │
│ │ │ an empty string. See │
│ │ │ os-release(5) for more │
│ │ │ information. │
├───────────┼────────────────────┼────────────────────────┤
│ "%b" │ Boot ID │ The boot ID of the │
│ │ │ running system, │
│ │ │ formatted as string. │
│ │ │ See random(4) for more │
│ │ │ information. │
├───────────┼────────────────────┼────────────────────────┤
│ "%B" │ Operating system │ The operating system │
│ │ build ID │ build identifier of │
│ │ │ the running system, as │
│ │ │ read from the │
│ │ │ BUILD_ID= field of │
│ │ │ /etc/os-release. If │
│ │ │ not set, resolves to │
│ │ │ an empty string. See │
│ │ │ os-release(5) for more │
│ │ │ information. │
├───────────┼────────────────────┼────────────────────────┤
│ "%C" │ System or user │ In --user mode, this │
│ │ cache directory │ is the same as │
│ │ │ $XDG_CACHE_HOME, and │
│ │ │ /var/cache otherwise. │
├───────────┼────────────────────┼────────────────────────┤
│ "%g" │ User group │ This is the name of │
│ │ │ the group running the │
│ │ │ command. In case of │
│ │ │ the system instance │
│ │ │ this resolves to │
│ │ │ "root". │
├───────────┼────────────────────┼────────────────────────┤
│ "%G" │ User GID │ This is the numeric │
│ │ │ GID of the group │
│ │ │ running the command. │
│ │ │ In case of the system │
│ │ │ instance this resolves │
│ │ │ to 0. │
├───────────┼────────────────────┼────────────────────────┤
│ "%h" │ User home │ This is the home │
│ │ directory │ directory of the user │
│ │ │ running the command. │
│ │ │ In case of the system │
│ │ │ instance this resolves │
│ │ │ to "/root". │
├───────────┼────────────────────┼────────────────────────┤
│ "%H" │ Host name │ The hostname of the │
│ │ │ running system. │
├───────────┼────────────────────┼────────────────────────┤
│ "%l" │ Short host name │ The hostname of the │
│ │ │ running system, │
│ │ │ truncated at the first │
│ │ │ dot to remove any │
│ │ │ domain component. │
├───────────┼────────────────────┼────────────────────────┤
│ "%L" │ System or user log │ In --user mode, this │
│ │ directory │ is the same as │
│ │ │ $XDG_STATE_HOME with │
│ │ │ /log appended, and │
│ │ │ /var/log otherwise. │
├───────────┼────────────────────┼────────────────────────┤
│ "%m" │ Machine ID │ The machine ID of the │
│ │ │ running system, │
│ │ │ formatted as string. │
│ │ │ See machine-id(5) for │
│ │ │ more information. │
├───────────┼────────────────────┼────────────────────────┤
│ "%M" │ Operating system │ The operating system │
│ │ image identifier │ image identifier of │
│ │ │ the running system, as │
│ │ │ read from the │
│ │ │ IMAGE_ID= field of │
│ │ │ /etc/os-release. If │
│ │ │ not set, resolves to │
│ │ │ an empty string. See │
│ │ │ os-release(5) for more │
│ │ │ information. │
├───────────┼────────────────────┼────────────────────────┤
│ "%o" │ Operating system │ The operating system │
│ │ ID │ identifier of the │
│ │ │ running system, as │
│ │ │ read from the ID= │
│ │ │ field of │
│ │ │ /etc/os-release. See │
│ │ │ os-release(5) for more │
│ │ │ information. │
├───────────┼────────────────────┼────────────────────────┤
│ "%S" │ System or user │ In --user mode, this │
│ │ state directory │ is the same as │
│ │ │ $XDG_STATE_HOME, and │
│ │ │ /var/lib otherwise. │
├───────────┼────────────────────┼────────────────────────┤
│ "%t" │ System or user │ In --user mode, this │
│ │ runtime directory │ is the same │
│ │ │ $XDG_RUNTIME_DIR, and │
│ │ │ /run/ otherwise. │
├───────────┼────────────────────┼────────────────────────┤
│ "%T" │ Directory for │ This is either /tmp or │
│ │ temporary files │ the path "$TMPDIR", │
│ │ │ "$TEMP" or "$TMP" are │
│ │ │ set to. (Note that the │
│ │ │ directory may be │
│ │ │ specified without a │
│ │ │ trailing slash.) │
├───────────┼────────────────────┼────────────────────────┤
│ "%u" │ User name │ This is the name of │
│ │ │ the user running the │
│ │ │ command. In case of │
│ │ │ the system instance │
│ │ │ this resolves to │
│ │ │ "root". │
├───────────┼────────────────────┼────────────────────────┤
│ "%U" │ User UID │ This is the numeric │
│ │ │ UID of the user │
│ │ │ running the command. │
│ │ │ In case of the system │
│ │ │ instance this resolves │
│ │ │ to 0. │
├───────────┼────────────────────┼────────────────────────┤
│ "%v" │ Kernel release │ Identical to uname -r │
│ │ │ output. │
├───────────┼────────────────────┼────────────────────────┤
│ "%V" │ Directory for │ This is either │
│ │ larger and │ /var/tmp or the path │
│ │ persistent │ "$TMPDIR", "$TEMP" or │
│ │ temporary files │ "$TMP" are set to. │
│ │ │ (Note that the │
│ │ │ directory may be │
│ │ │ specified without a │
│ │ │ trailing slash.) │
├───────────┼────────────────────┼────────────────────────┤
│ "%w" │ Operating system │ The operating system │
│ │ version ID │ version identifier of │
│ │ │ the running system, as │
│ │ │ read from the │
│ │ │ VERSION_ID= field of │
│ │ │ /etc/os-release. If │
│ │ │ not set, resolves to │
│ │ │ an empty string. See │
│ │ │ os-release(5) for more │
│ │ │ information. │
├───────────┼────────────────────┼────────────────────────┤
│ "%W" │ Operating system │ The operating system │
│ │ variant ID │ variant identifier of │
│ │ │ the running system, as │
│ │ │ read from the │
│ │ │ VARIANT_ID= field of │
│ │ │ /etc/os-release. If │
│ │ │ not set, resolves to │
│ │ │ an empty string. See │
│ │ │ os-release(5) for more │
│ │ │ information. │
├───────────┼────────────────────┼────────────────────────┤
│ "%%" │ Single percent │ Use "%%" in place of │
│ │ sign │ "%" to specify a │
│ │ │ single percent sign. │
└───────────┴────────────────────┴────────────────────────┘
EXAMPLES
Example 1. Create directories with specific mode and ownership
screen(1), needs two directories created at boot with specific
modes and ownership:
# /usr/lib/tmpfiles.d/screen.conf
d /run/screens 1777 root screen 10d
d /run/uscreens 0755 root screen 10d12h
Contents of /run/screens and /run/uscreens will be cleaned up
after 10 and 10½ days, respectively.
Example 2. Create a directory with a SMACK attribute
D /run/cups - - - -
t /run/cups - - - - security.SMACK64=printing user.attr-with-spaces="foo bar"
The directory will be owned by root and have default mode. Its
contents are not subject to time-based cleanup, but will be
obliterated when systemd-tmpfiles --remove runs.
Example 3. Create a directory and prevent its contents from
cleanup
abrt(1), needs a directory created at boot with specific mode and
ownership and its content should be preserved from the automatic
cleanup applied to the contents of /var/tmp:
# /usr/lib/tmpfiles.d/tmp.conf
d /var/tmp 1777 root root 30d
# /usr/lib/tmpfiles.d/abrt.conf
d /var/tmp/abrt 0755 abrt abrt -
Example 4. Apply clean up during boot and based on time
# /usr/lib/tmpfiles.d/dnf.conf
r! /var/cache/dnf/*/*/download_lock.pid
r! /var/cache/dnf/*/*/metadata_lock.pid
r! /var/lib/dnf/rpmdb_lock.pid
e /var/cache/dnf/ - - - 30d
The lock files will be removed during boot. Any files and
directories in /var/cache/dnf/ will be removed after they have
not been accessed in 30 days.
Example 5. Empty the contents of a cache directory on boot
# /usr/lib/tmpfiles.d/krb5rcache.conf
e! /var/cache/krb5rcache - - - 0
Any files and subdirectories in /var/cache/krb5rcache/ will be
removed on boot. The directory will not be created.
Example 6. Provision SSH public key access for root user via
Credentials in QEMU
-smbios type=11,value=io.systemd.credential.binary:tmpfiles.extra=$(echo -e "d /root/.ssh 0750 root root -\nf~ /root/.ssh/authorized_keys 0600 root root - $(ssh-add -L | base64 -w 0)" | base64 -w 0)
By passing this line to QEMU, the public key of the current user
will be encoded in base64, added to a tmpfiles.d line that tells
systemd-tmpfiles to decode it into /root/.ssh/authorized_keys,
encode that line itself in base64 and pass it as a Credential
that will be picked up by systemd from SMBIOS on boot.
/RUN/ AND /VAR/RUN/
/var/run/ is a deprecated symlink to /run/, and applications
should use the latter. systemd-tmpfiles will warn if /var/run/
is used.
SEE ALSO
systemd(1), systemd-tmpfiles(8), systemd-delta(1),
systemd.exec(5), attr(5), getfattr(1), setfattr(1), setfacl(1),
getfacl(1), chattr(1), btrfs-subvolume(8), btrfs-qgroup(8)
NOTES
1. Base64 decoded
https://www.rfc-editor.org/rfc/rfc4648.html
2. System and Service Credentials
https://systemd.io/CREDENTIALS
3. Notes on Resolvability of User and Group Names
https://systemd.io/UIDS-GIDS/#notes-on-resolvability-of-user-and-group-names
COLOPHON
This page is part of the systemd (systemd system and service
manager) project. Information about the project can be found at
⟨http://www.freedesktop.org/wiki/Software/systemd⟩. If you have
a bug report for this manual page, see
⟨http://www.freedesktop.org/wiki/Software/systemd/#bugreports⟩.
This page was obtained from the project's upstream Git repository
⟨https://github.com/systemd/systemd.git⟩ on 2024-06-14. (At that
time, the date of the most recent commit that was found in the
repository was 2024-06-13.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
systemd 257~devel TMPFILES.D(5)
Pages that refer to this page: systemd.exec(5), sysusers.d(5), file-hierarchy(7), systemd.directives(7), systemd.index(7), systemd-stub(7), systemd.system-credentials(7), systemd-pstore.service(8), systemd-tmpfiles(8)