Go to the version of this page provided by the util-linux project
fsck(8) — Linux manual page
FSCK(8) System Manager's Manual FSCK(8)
NAME
fsck - check and repair a Linux file system
SYNOPSIS
fsck [ -sAVRTMNP ] [ -C [ fd ] ] [ -t fstype ] [filesys ... ]
[--] [ fs-specific-options ]
DESCRIPTION
fsck is used to check and optionally repair one or more Linux
file systems. filesys can be a device name (e.g. /dev/hdc1,
/dev/sdb2), a mount point (e.g. /, /usr, /home), or an ext2
label or UUID specifier (e.g.
UUID=8868abf6-88c5-4a83-98b8-bfc24057f7bd or LABEL=root).
Normally, the fsck program will try to handle file systems on
different physical disk drives in parallel to reduce the total
amount of time needed to check all of the file systems.
If no file systems are specified on the command line, and the -A
option is not specified, fsck will default to checking file
systems in /etc/fstab serially. This is equivalent to the -As
options.
The exit code returned by fsck is the sum of the following
conditions:
0 - No errors
1 - File system errors corrected
2 - System should be rebooted
4 - File system errors left uncorrected
8 - Operational error
16 - Usage or syntax error
32 - Fsck canceled by user request
128 - Shared library error
The exit code returned when multiple file systems are checked is
the bit-wise OR of the exit codes for each file system that is
checked.
In actuality, fsck is simply a front-end for the various file
system checkers (fsck.fstype) available under Linux. The file
system-specific checker is searched for in /sbin first, then in
/etc/fs and /etc, and finally in the directories listed in the
PATH environment variable. Please see the file system-specific
checker manual pages for further details.
OPTIONS
-s Serialize fsck operations. This is a good idea if you are
checking multiple file systems and the checkers are in an
interactive mode. (Note: e2fsck(8) runs in an interactive
mode by default. To make e2fsck(8) run in a non-
interactive mode, you must either specify the -p or -a
option, if you wish for errors to be corrected
automatically, or the -n option if you do not.)
-t fslist
Specifies the type(s) of file system to be checked. When
the -A flag is specified, only file systems that match
fslist are checked. The fslist parameter is a comma-
separated list of file systems and options specifiers.
All of the file systems in this comma-separated list may
be prefixed by a negation operator 'no' or '!', which
requests that only those file systems not listed in fslist
will be checked. If all of the file systems in fslist are
not prefixed by a negation operator, then only those file
systems listed in fslist will be checked.
Options specifiers may be included in the comma-separated
fslist. They must have the format opts=fs-option. If an
options specifier is present, then only file systems which
contain fs-option in their mount options field of
/etc/fstab will be checked. If the options specifier is
prefixed by a negation operator, then only those file
systems that do not have fs-option in their mount options
field of /etc/fstab will be checked.
For example, if opts=ro appears in fslist, then only file
systems listed in /etc/fstab with the ro option will be
checked.
For compatibility with Mandrake distributions whose boot
scripts depend upon an unauthorized UI change to the fsck
program, if a file system type of loop is found in fslist,
it is treated as if opts=loop were specified as an
argument to the -t option.
Normally, the file system type is deduced by searching for
filesys in the /etc/fstab file and using the corresponding
entry. If the type can not be deduced, and there is only
a single file system given as an argument to the -t
option, fsck will use the specified file system type. If
this type is not available, then the default file system
type (currently ext2) is used.
-A Walk through the /etc/fstab file and try to check all file
systems in one run. This option is typically used from
the /etc/rc system initialization file, instead of
multiple commands for checking a single file system.
The root file system will be checked first unless the -P
option is specified (see below). After that, file systems
will be checked in the order specified by the fs_passno
(the sixth) field in the /etc/fstab file. File Systems
with a fs_passno value of 0 are skipped and are not
checked at all. File Systems with a fs_passno value of
greater than zero will be checked in order, with file
systems with the lowest fs_passno number being checked
first. If there are multiple file systems with the same
pass number, fsck will attempt to check them in parallel,
although it will avoid running multiple file system checks
on the same physical disk.
Hence, a very common configuration in /etc/fstab files is
to set the root file system to have a fs_passno value of 1
and to set all other file systems to have a fs_passno
value of 2. This will allow fsck to automatically run
file system checkers in parallel if it is advantageous to
do so. System administrators might choose not to use this
configuration if they need to avoid multiple file system
checks running in parallel for some reason --- for
example, if the machine in question is short on memory so
that excessive paging is a concern.
-C [ fd ]
Display completion/progress bars for those file system
checkers (currently only for ext2 and ext3) which support
them. Fsck will manage the file system checkers so that
only one of them will display a progress bar at a time.
GUI front-ends may specify a file descriptor fd, in which
case the progress bar information will be sent to that
file descriptor.
-M Do not check mounted file systems and return an exit code
of 0 for mounted file systems.
-N Don't execute, just show what would be done.
-P When the -A flag is set, check the root file system in
parallel with the other file systems. This is not the
safest thing in the world to do, since if the root file
system is in doubt things like the e2fsck(8) executable
might be corrupted! This option is mainly provided for
those sysadmins who don't want to repartition the root
file system to be small and compact (which is really the
right solution).
-R When checking all file systems with the -A flag, skip the
root file system (in case it's already mounted read-
write).
-T Don't show the title on startup.
-V Produce verbose output, including all file system-specific
commands that are executed.
fs-specific-options
Options which are not understood by fsck are passed to the
file system-specific checker. These arguments must not
take arguments, as there is no way for fsck to be able to
properly guess which arguments take options and which
don't.
Options and arguments which follow the -- are treated as
file system-specific options to be passed to the file
system-specific checker.
Please note that fsck is not designed to pass arbitrarily
complicated options to file system-specific checkers. If
you're doing something complicated, please just execute
the file system-specific checker directly. If you pass
fsck some horribly complicated option and arguments, and
it doesn't do what you expect, don't bother reporting it
as a bug. You're almost certainly doing something that
you shouldn't be doing with fsck.
Options to different file system-specific fsck's are not
standardized. If in doubt, please consult the man pages of the
file system-specific checker. Although not guaranteed, the
following options are supported by most file system checkers:
-a Automatically repair the file system without any questions
(use this option with caution). Note that e2fsck(8)
supports -a for backwards compatibility only. This option
is mapped to e2fsck's -p option which is safe to use,
unlike the -a option that some file system checkers
support.
-n For some file system-specific checkers, the -n option will
cause the fs-specific fsck to avoid attempting to repair
any problems, but simply report such problems to stdout.
This is however not true for all file system-specific
checkers. In particular, fsck.reiserfs(8) will not report
any corruption if given this option. fsck.minix(8) does
not support the -n option at all.
-r Interactively repair the file system (ask for
confirmations). Note: It is generally a bad idea to use
this option if multiple fsck's are being run in parallel.
Also note that this is e2fsck's default behavior; it
supports this option for backwards compatibility reasons
only.
-y For some file system-specific checkers, the -y option will
cause the fs-specific fsck to always attempt to fix any
detected file system corruption automatically. Sometimes
an expert may be able to do better driving the fsck
manually. Note that not all file system-specific checkers
implement this option. In particular fsck.minix(8) and
fsck.cramfs(8) does not support the -y option as of this
writing.
AUTHOR
Theodore Ts'o (tytso@mit.edu)
FILES
/etc/fstab.
ENVIRONMENT VARIABLES
The fsck program's behavior is affected by the following
environment variables:
FSCK_FORCE_ALL_PARALLEL
If this environment variable is set, fsck will attempt to
run all of the specified file systems in parallel,
regardless of whether the file systems appear to be on the
same device. (This is useful for RAID systems or high-end
storage systems such as those sold by companies such as
IBM or EMC.)
FSCK_MAX_INST
This environment variable will limit the maximum number of
file system checkers that can be running at one time.
This allows configurations which have a large number of
disks to avoid fsck starting too many file system checkers
at once, which might overload CPU and memory resources
available on the system. If this value is zero, then an
unlimited number of processes can be spawned. This is
currently the default, but future versions of fsck may
attempt to automatically determine how many file system
checks can be run based on gathering accounting data from
the operating system.
PATH The PATH environment variable is used to find file system
checkers. A set of system directories are searched first:
/sbin, /sbin/fs.d, /sbin/fs, /etc/fs, and /etc. Then the
set of directories found in the PATH environment are
searched.
FSTAB_FILE
This environment variable allows the system administrator
to override the standard location of the /etc/fstab file.
It is also useful for developers who are testing fsck.
SEE ALSO
fstab(5), mkfs(8), fsck.ext2(8) or fsck.ext3(8) or e2fsck(8),
cramfsck(8), fsck.minix(8), fsck.msdos(8), fsck.jfs(8),
fsck.nfs(8), fsck.vfat(8), fsck.xfs(8), fsck.xiafs(8),
reiserfsck(8).
COLOPHON
This page is part of the e2fsprogs (utilities for ext2/3/4
filesystems) project. Information about the project can be found
at ⟨http://e2fsprogs.sourceforge.net/⟩. It is not known how to
report bugs for this man page; if you know, please send a mail to
man-pages@man7.org. This page was obtained from the project's
upstream Git repository
⟨git://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git⟩ on
2024-06-14. (At that time, the date of the most recent commit
that was found in the repository was 2024-05-20.) If you
discover any rendering problems in this HTML version of the page,
or you believe there is a better or more up-to-date source for
the page, or you have corrections or improvements to the
information in this COLOPHON (which is not part of the original
manual page), send a mail to man-pages@man7.org
E2fsprogs version 1.47.1 May 2024 FSCK(8)