tc-matchall(8) — Linux manual page

Match-all classifier in tc(8)     Linux    Match-all classifier in tc(8)

NAME

       matchall - traffic control filter that matches every packet

SYNOPSIS

       tc filter ... matchall [ skip_sw | skip_hw  ] [ action
               ACTION_SPEC ] [ classid CLASSID ]

DESCRIPTION

       The matchall filter allows one to classify every packet that
       flows on the port and run a action on it.

OPTIONS

       action ACTION_SPEC
              Apply an action from the generic actions framework on
              matching packets.

       classid CLASSID
              Push matching packets into the class identified by
              CLASSID.

       skip_sw
              Do not process filter by software. If hardware has no
              offload support for this filter, or TC offload is not
              enabled for the interface, operation will fail.

       skip_hw
              Do not process filter by hardware.

EXAMPLES

       To create ingress mirroring from port eth1 to port eth2:

              tc qdisc  add dev eth1 handle ffff: clsact
              tc filter add dev eth1 ingress                \
                      matchall skip_sw                      \
                      action mirred egress mirror           \
                      dev eth2

       The first command creates a clsact qdisc with handle ffff: on
       device eth1 where the second command attaches a matchall filters
       on it that mirrors the packets to device eth2 for ingress.

       To create egress mirroring from port eth1 to port eth2:

              tc qdisc add dev eth1 handle ffff: clsact
              tc filter add dev eth1 egress                  \
                      matchall skip_sw                       \
                      action mirred egress mirror            \
                      dev eth2

       The first command creates a clsact qdisc with handle ffff: on
       device eth1 where the second command attaches a matchall filters
       on it that mirrors the packets to device eth2 for egress.

       To sample one of every 100 packets flowing into interface eth0 to
       psample group 12:

              tc qdisc add dev eth0 handle ffff: ingress
              tc filter add dev eth0 parent ffff: matchall \
                   action sample rate 100 group 12

SEE ALSO

       tc(8),

COLOPHON

       This page is part of the iproute2 (utilities for controlling
       TCP/IP networking and traffic) project.  Information about the
       project can be found at 
       ⟨http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2⟩.
       If you have a bug report for this manual page, send it to
       netdev@vger.kernel.org, shemminger@osdl.org.  This page was
       obtained from the project's upstream Git repository
       ⟨https://git.kernel.org/pub/scm/network/iproute2/iproute2.git⟩ on
       2024-06-14.  (At that time, the date of the most recent commit
       that was found in the repository was 2024-06-11.)  If you
       discover any rendering problems in this HTML version of the page,
       or you believe there is a better or more up-to-date source for
       the page, or you have corrections or improvements to the
       information in this COLOPHON (which is not part of the original
       manual page), send a mail to man-pages@man7.org

iproute2                       21 Oct 2015 Match-all classifier in tc(8)

Pages that refer to this page: tc(8), tc-sample(8)

---