slapo-dynlist(5) — Linux manual page
SLAPO-DYNLIST(5) File Formats Manual SLAPO-DYNLIST(5)
NAME
slapo-dynlist - Dynamic List overlay to slapd
SYNOPSIS
ETCDIR/slapd.conf
DESCRIPTION
The dynlist overlay to slapd(8) allows expansion of dynamic lists
and groups. Any time an entry with a specific objectClass
(defined in the overlay configuration) is being returned, the
LDAP URI-valued occurrences of a specific attribute (also defined
in the overlay configuration) are expanded into the corresponding
entries.
For a dynamic list, the values of the attributes listed in the
URI are added from the matching entries to the original entry.
No recursion is allowed, to avoid potential infinite loops. The
resulting entry must comply with the LDAP data model, so
constraints are enforced. For example, if a SINGLE-VALUE
attribute is listed, only the first value found during the list
expansion appears in the final entry.
For a dynamic group, the DNs of the matching entries are added to
a member attribute in the original entry.
All dynamic behavior is disabled when the manageDSAit control
(RFC 3296) is used. In that case, the contents of the original
entry is returned; namely, the URLs are returned instead of being
expanded.
CONFIGURATION
The config directives that are specific to the dynlist overlay
must be prefixed by dynlist-, to avoid potential conflicts with
directives specific to the underlying database or to other
stacked overlays.
overlay dynlist
This directive adds the dynlist overlay to the current
database, or to the frontend, if used before any database
instantiation; see slapd.conf(5) for details.
This slapd.conf configuration option is defined for the dynlist
overlay. It may have multiple occurrences, and it must appear
after the overlay directive.
dynlist-attrset <group-oc> [<URI>] <URL-ad> [options]
The value group-oc is the name of the objectClass that
triggers the dynamic expansion of the data.
The optional URI restricts expansion only to entries
matching the DN, the scope and the filter portions of the
URI.
The value URL-ad is the name of the attributeDescription
that contains the URI that is expanded by the overlay; if
none is present, no expansion occurs. If the intersection
of the attributes requested by the search operation (or
the asserted attribute for compares) and the attributes
listed in the URI is empty, no expansion occurs for that
specific URI. It must be a subtype of labeledURI.
The remaining options depend on whether a dynamic list or
a dynamic group is being configured.
For a dynamic list, the allowed options have the form
[<mapped-ad>:<list-ad> ...]
The mapped-ad can be used to remap attributes obtained
through expansion. The list-ad must be one of the
attributes returned in the expansion of the URIs in the
URL-ad attribute of the dynamic entry. Multiple mapping
statements can be used. Note that in order for dynamic
lists to be usable in a search filter, the dynamic
attributes to be filtered must be explicitly mapped. They
can be mapped to themselves if no transformation is
required.
For a dynamic group, the allowed options are
<member-ad>[+<memberOf-ad>[@<static-oc>[*]]]
The member-ad is required; this attribute will list the DN
of the entries resulting from the internal search. In
this case, the attrs portion of the URIs in the URL-ad
attribute must be absent, and the DNs of all the entries
resulting from the expansion of the URIs are listed as
values of this attribute. Compares that assert the value
of the member-ad attribute of entries with group-oc
objectClass apply as if the DN of the entries resulting
from the expansion of the URI were present in the group-oc
entry as values of the member-ad attribute. If the
optional memberOf-ad attribute is also specified, then it
will be populated with the DNs of the dynamic groups that
an entry is a member of. If the optional static-oc
objectClass is also specified, then the memberOf attribute
will also be populated with the DNs of the static groups
that an entry is a member of. If the optional * character
is also specified, then the member and memberOf values
will be populated recursively, for nested groups. Note
that currently nesting is only supported for Search
operations, not Compares.
dynlist-simple TRUE | FALSE
This option downgrades to the behavior of the OpenLDAP 2.4
dynlist overlay. It disables memberOf processing, nested
group support, and filter evaluation of dynamically
generated values. The default is FALSE.
The dynlist overlay may be used with any backend, but it is
mainly intended for use with local storage backends. In case the
URI expansion is very resource-intensive and occurs frequently
with well-defined patterns, one should consider adding a
proxycache later on in the overlay stack.
AUTHORIZATION
By default the expansions are performed using the identity of the
current LDAP user. This identity may be overridden by setting
the dgIdentity attribute in the group's entry to the DN of
another LDAP user. In that case the dgIdentity will be used when
expanding the URIs in the object. Setting the dgIdentity to a
zero-length string will cause the expansions to be performed
anonymously. Note that the dgIdentity attribute is defined in
the dyngroup schema, and this schema must be loaded before the
dgIdentity authorization feature may be used. If the dgAuthz
attribute is also present in the group's entry, its values are
used to determine what identities are authorized to use the
dgIdentity to expand the group. Values of the dgAuthz attribute
must conform to the (experimental) OpenLDAP authz syntax. When
using dynamic memberOf in search filters, search access to the
entryDN pseudo-attribute is required.
EXAMPLE
This example collects all the email addresses of a database into
a single entry; first of all, make sure that slapd.conf contains
the directives:
include /path/to/dyngroup.schema
# ...
database <database>
# ...
overlay dynlist
dynlist-attrset groupOfURLs memberURL
and that slapd loads dynlist.la, if compiled as a run-time
module; then add to the database an entry like
dn: cn=Dynamic List,ou=Groups,dc=example,dc=com
objectClass: groupOfURLs
cn: Dynamic List
memberURL: ldap:///ou=People,dc=example,dc=com?mail?sub?(objectClass=person)
If no <attrs> are provided in the URI, all (non-operational)
attributes are collected.
The values of the above list can not be evaluated in a search
filter. To enable filter evaluation on the dynamic list, the
configuration must be changed to explicitly map the dynamic
attributes to be filtered. In this case mail is just mapped to
itself.
include /path/to/dyngroup.schema
# ...
database <database>
# ...
overlay dynlist
dynlist-attrset groupOfURLs memberURL mail:mail
This example implements the dynamic group feature on the member
attribute:
include /path/to/dyngroup.schema
# ...
database <database>
# ...
overlay dynlist
dynlist-attrset groupOfURLs memberURL member
A dynamic group with dgIdentity authorization could be created
with an entry like
dn: cn=Dynamic Group,ou=Groups,dc=example,dc=com
objectClass: groupOfURLs
objectClass: dgIdentityAux
cn: Dynamic Group
memberURL: ldap:///ou=People,dc=example,dc=com??sub?(objectClass=person)
dgIdentity: cn=Group Proxy,ou=Services,dc=example,dc=com
This example extends the dynamic group feature to add a dynamic
dgMemberOf attribute to all the members of a dynamic group:
include /path/to/dyngroup.schema
# ...
database <database>
# ...
overlay dynlist
dynlist-attrset groupOfURLs memberURL member+dgMemberOf
This example extends the dynamic memberOf feature to add the
memberOf attribute to all the members of both static and dynamic
groups:
include /path/to/dyngroup.schema
# ...
database <database>
# ...
overlay dynlist
dynlist-attrset groupOfURLs memberURL member+memberOf@groupOfNames
This dynamic memberOf feature can fully replace the functionality
of the slapo-memberof(5) overlay.
FILES
ETCDIR/slapd.conf
default slapd configuration file
BACKWARD COMPATIBILITY
The dynlist overlay has been reworked with the 2.5 release to use
a consistent namespace as with other overlays. As a side-effect
the following cn=config parameters are deprecated and will be
removed in a future release: olcDlAttrSet is replaced with
olcDynListAttrSet olcDynamicList is replaced with
olcDynListConfig
SEE ALSO
slapd.conf(5), slapd-config(5), slapd(8). The slapo-dynlist(5)
overlay supports dynamic configuration via back-config.
BUGS
Filtering on dynamic groups may return incomplete results if the
search operation uses the pagedResults control.
ACKNOWLEDGEMENTS
This module was written in 2004 by Pierangelo Masarati for SysNet
s.n.c.
Attribute remapping was contributed in 2008 by Emmanuel Dreyfus.
COLOPHON
This page is part of the OpenLDAP (an open source implementation
of the Lightweight Directory Access Protocol) project.
Information about the project can be found at
⟨http://www.openldap.org/⟩. If you have a bug report for this
manual page, see ⟨http://www.openldap.org/its/⟩. This page was
obtained from the project's upstream Git repository
⟨https://git.openldap.org/openldap/openldap.git⟩ on 2024-06-14.
(At that time, the date of the most recent commit that was found
in the repository was 2024-06-13.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
OpenLDAP LDVERSION RELEASEDATE SLAPO-DYNLIST(5)
Pages that refer to this page: slapd.overlays(5), slapo-dynlist(5), slapo-memberof(5), slapo-nestgroup(5)