lvextend(8) — Linux manual page
LVEXTEND(8) System Manager's Manual LVEXTEND(8)
NAME
lvextend — Add space to a logical volume
SYNOPSIS
lvextend option_args position_args
[ option_args ]
[ position_args ]
--alloc contiguous|cling|cling_by_tags|normal|anywhere|
inherit
-A|--autobackup y|n
--commandprofile String
--config String
-d|--debug
--devices PV
--devicesfile String
--driverloaded y|n
-l|--extents [+]Number[PERCENT]
-f|--force
-h|--help
--journal String
--lockopt String
--longhelp
-m|--mirrors Number
-n|--nofsck
--nohints
--nolocking
--nosync
--noudevsync
--poolmetadatasize [+]Size[m|UNIT]
--profile String
-q|--quiet
--reportformat basic|json
-r|--resizefs
-L|--size [+]Size[m|UNIT]
-i|--stripes Number
-I|--stripesize Size[k|UNIT]
-t|--test
--type linear|striped|snapshot|raid|mirror|thin|thin-pool|
vdo|vdo-pool|cache|cache-pool|writecache
--usepolicies
-v|--verbose
--version
-y|--yes
DESCRIPTION
lvextend extends the size of an LV. This requires allocating log‐
ical extents from the VG's free physical extents. If the exten‐
sion adds a new LV segment, the new segment will use the existing
segment type of the LV.
Extending a copy-on-write snapshot LV adds space for COW blocks.
Use lvconvert(8) to change the number of data images in a RAID or
mirrored LV.
In the usage section below, --size Size can be replaced with
--extents Number. See both descriptions the options section.
USAGE
Extend an LV by a specified size.
lvextend -L|--size [+]Size[m|UNIT] LV
[ -l|--extents [+]Number[PERCENT] ]
[ -r|--resizefs ]
[ -i|--stripes Number ]
[ -I|--stripesize Size[k|UNIT] ]
[ --poolmetadatasize [+]Size[m|UNIT] ]
[ COMMON_OPTIONS ]
[ PV ... ]
—
Extend an LV by specified PV extents.
lvextend LV PV ...
[ -r|--resizefs ]
[ -i|--stripes Number ]
[ -I|--stripesize Size[k|UNIT] ]
[ COMMON_OPTIONS ]
—
Extend a pool metadata SubLV by a specified size.
lvextend --poolmetadatasize [+]Size[m|UNIT] LV1
[ -i|--stripes Number ]
[ -I|--stripesize Size[k|UNIT] ]
[ COMMON_OPTIONS ]
[ PV ... ]
LV1 types: thinpool
—
Extend an LV according to a predefined policy.
lvextend --usepolicies LV1
[ -r|--resizefs ]
[ COMMON_OPTIONS ]
[ PV ... ]
LV1 types: snapshot thinpool
—
Common options for command:
[ -A|--autobackup y|n ]
[ -f|--force ]
[ -m|--mirrors Number ]
[ -n|--nofsck ]
[ --alloc contiguous|cling|cling_by_tags|normal|anywhere|
inherit ]
[ --nosync ]
[ --noudevsync ]
[ --reportformat basic|json ]
[ --type linear|striped|snapshot|raid|mirror|thin|
thin-pool|vdo|vdo-pool|cache|cache-pool|writecache ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --devices PV ]
[ --devicesfile String ]
[ --driverloaded y|n ]
[ --journal String ]
[ --lockopt String ]
[ --longhelp ]
[ --nohints ]
[ --nolocking ]
[ --profile String ]
[ --version ]
OPTIONS
--alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
Determines the allocation policy when a command needs to
allocate Physical Extents (PEs) from the VG. Each VG and
LV has an allocation policy which can be changed with
vgchange/lvchange, or overridden on the command line.
normal applies common sense rules such as not placing par‐
allel stripes on the same PV. inherit applies the VG pol‐
icy to an LV. contiguous requires new PEs be placed adja‐
cent to existing PEs. cling places new PEs on the same PV
as existing PEs in the same stripe of the LV. If there
are sufficient PEs for an allocation, but normal does not
use them, anywhere will use them even if it reduces per‐
formance, e.g. by placing two stripes on the same PV. Op‐
tional positional PV args on the command line can also be
used to limit which PVs the command will use for alloca‐
tion. See lvm(8) for more information about allocation.
-A|--autobackup y|n
Specifies if metadata should be backed up automatically
after a change. Enabling this is strongly advised! See
vgcfgbackup(8) for more information.
--commandprofile String
The command profile to use for command configuration. See
lvm.conf(5) for more information about profiles.
--config String
Config settings for the command. These override
lvm.conf(5) settings. The String arg uses the same format
as lvm.conf(5), or may use section/field syntax. See
lvm.conf(5) for more information about config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the
detail of messages sent to the log file and/or syslog (if
configured).
--devices PV
Devices that the command can use. This option can be re‐
peated or accepts a comma separated list of devices. This
overrides the devices file.
--devicesfile String
A file listing devices that LVM should use. The file must
exist in /etc/lvm/devices/ and is managed with the
lvmdevices(8) command. This overrides the lvm.conf(5) de‐
vices/devicesfile and devices/use_devicesfile settings.
--driverloaded y|n
If set to no, the command will not attempt to use device-
mapper. For testing and debugging.
-l|--extents [+]Number[PERCENT]
Specifies the new size of the LV in logical extents. The
--size and --extents options are alternate methods of
specifying size. The total number of physical extents
used will be greater when redundant data is needed for
RAID levels. An alternate syntax allows the size to be
determined indirectly as a percentage of the size of a re‐
lated VG, LV, or set of PVs. The suffix %VG denotes the
total size of the VG, the suffix %FREE the remaining free
space in the VG, and the suffix %PVS the free space in the
specified PVs. For a snapshot, the size can be expressed
as a percentage of the total size of the origin LV with
the suffix %ORIGIN (100%ORIGIN provides space for the
whole origin). When expressed as a percentage, the size
defines an upper limit for the number of logical extents
in the new LV. The precise number of logical extents in
the new LV is not determined until the command has com‐
pleted. When the plus + or minus - prefix is used, the
value is not an absolute size, but is relative and added
or subtracted from the current size.
-f|--force ...
Override various checks, confirmations and protections.
Use with extreme caution.
-h|--help
Display help text.
--journal String
Record information in the systemd journal. This informa‐
tion is in addition to information enabled by the lvm.conf
log/journal setting. command: record information about
the command. output: record the default command output.
debug: record full command debugging.
--lockopt String
Used to pass options for special cases to lvmlockd. See
lvmlockd(8) for more information.
--longhelp
Display long help text.
-m|--mirrors Number
Not used.
-n|--nofsck
Do not perform fsck before resizing filesystem when
filesystem requires it. You may need to use --force to
proceed with this option.
--nohints
Do not use the hints file to locate devices for PVs. A
command may read more devices to find PVs when hints are
not used. The command will still perform standard hint
file invalidation where appropriate.
--nolocking
Disable locking.
--nosync
Causes the creation of mirror, raid1, raid4, raid5 and
raid10 to skip the initial synchronization. In case of
mirror, raid1 and raid10, any data written afterwards will
be mirrored, but the original contents will not be copied.
In case of raid4 and raid5, no parity blocks will be writ‐
ten, though any data written afterwards will cause parity
blocks to be stored. This is useful for skipping a poten‐
tially long and resource intensive initial sync of an emp‐
ty mirror/raid1/raid4/raid5 and raid10 LV. This option is
not valid for raid6, because raid6 relies on proper parity
(P and Q Syndromes) being created during initial synchro‐
nization in order to reconstruct proper user date in case
of device failures. raid0 and raid0_meta do not provide
any data copies or parity support and thus do not support
initial synchronization.
--noudevsync
Disables udev synchronisation. The process will not wait
for notification from udev. It will continue irrespective
of any possible udev processing in the background. Only
use this if udev is not running or has rules that ignore
the devices LVM creates.
--poolmetadatasize [+]Size[m|UNIT]
Specifies the new size of the pool metadata LV. The plus
prefix + can be used, in which case the value is added to
the current size.
--profile String
An alias for --commandprofile or --metadataprofile, de‐
pending on the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and
--verbose. Repeat once to also suppress any prompts with
answer 'no'.
--reportformat basic|json
Overrides current output format for reports which is de‐
fined globally by the report/output_format setting in
lvm.conf(5). basic is the original format with columns
and rows. If there is more than one report per command,
each report is prefixed with the report name for identifi‐
cation. json produces report output in JSON format. See
lvmreport(7) for more information.
-r|--resizefs
Resize underlying filesystem together with the LV using
fsadm(8).
-L|--size [+]Size[m|UNIT]
Specifies the new size of the LV. The --size and --ex‐
tents options are alternate methods of specifying size.
The total number of physical extents used will be greater
when redundant data is needed for RAID levels. When the
plus + or minus - prefix is used, the value is not an ab‐
solute size, but is relative and added or subtracted from
the current size.
-i|--stripes Number
Specifies the number of stripes in a striped LV. This is
the number of PVs (devices) that a striped LV is spread
across. Data that appears sequential in the LV is spread
across multiple devices in units of the stripe size (see
--stripesize). This does not change existing allocated
space, but only applies to space being allocated by the
command. When creating a RAID 4/5/6 LV, this number does
not include the extra devices that are required for pari‐
ty. The largest number depends on the RAID type (raid0:
64, raid10: 32, raid4/5: 63, raid6: 62), and when unspeci‐
fied, the default depends on the RAID type (raid0: 2,
raid10: 2, raid4/5: 3, raid6: 5.) To stripe a new raid LV
across all PVs by default, see lvm.conf(5) alloca‐
tion/raid_stripe_all_devices.
-I|--stripesize Size[k|UNIT]
The amount of data that is written to one device before
moving to the next in a striped LV.
-t|--test
Run in test mode. Commands will not update metadata. This
is implemented by disabling all metadata writing but nev‐
ertheless returning success to the calling function. This
may lead to unusual error messages in multi-stage opera‐
tions if a tool relies on reading back metadata it be‐
lieves has changed but hasn't.
--type linear|striped|snapshot|raid|mirror|thin|thin-pool|vdo|
vdo-pool|cache|cache-pool|writecache
The LV type, also known as "segment type" or "segtype".
See usage descriptions for the specific ways to use these
types. For more information about redundancy and perfor‐
mance (raid<N>, mirror, striped, linear) see lvmraid(7).
For thin provisioning (thin, thin-pool) see lvmthin(7).
For performance caching (cache, cache-pool) see
lvmcache(7). For copy-on-write snapshots (snapshot) see
usage definitions. For VDO (vdo) see lvmvdo(7). Several
commands omit an explicit type option because the type is
inferred from other options or shortcuts (e.g. --stripes,
--mirrors, --snapshot, --virtualsize, --thin, --cache,
--vdo). Use inferred types with care because it can lead
to unexpected results.
--usepolicies
Perform an operation according to the policy configured in
lvm.conf(5) or a profile.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase
the detail of messages sent to stdout and stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always
assume the answer yes. Use with extreme caution. (For au‐
tomatic no, see -qq.)
VARIABLES
LV Logical Volume name. See lvm(8) for valid names. An LV
positional arg generally includes the VG name and LV name,
e.g. VG/LV. LV1 indicates the LV must have a specific
type, where the accepted LV types are listed. (raid repre‐
sents raid<N> type).
PV Physical Volume name, a device path under /dev. For com‐
mands managing physical extents, a PV positional arg gen‐
erally accepts a suffix indicating a range (or multiple
ranges) of physical extents (PEs). When the first PE is
omitted, it defaults to the start of the device, and when
the last PE is omitted it defaults to end. Start and end
range (inclusive): PV[:PE-PE]... Start and length range
(counting from 0): PV[:PE+PE]...
String See the option description for information about the
string content.
Size[UNIT]
Size is an input number that accepts an optional unit.
Input units are always treated as base two values, regard‐
less of capitalization, e.g. 'k' and 'K' both refer to
1024. The default input unit is specified by letter, fol‐
lowed by |UNIT. UNIT represents other possible input
units: b|B is bytes, s|S is sectors of 512 bytes, k|K is
KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E
is EiB. (This should not be confused with the output con‐
trol --units, where capital letters mean multiple of
1000.)
ENVIRONMENT VARIABLES
See lvm(8) for information about environment variables used by
lvm. For example, LVM_VG_NAME can generally be substituted for a
required VG parameter.
EXAMPLES
Extend the size of an LV by 54MiB, using a specific PV.
lvextend -L +54 vg01/lvol10 /dev/sdk3
Extend the size of an LV by the amount of free space on PV
/dev/sdk3. This is equivalent to specifying "-l +100%PVS" on the
command line.
lvextend vg01/lvol01 /dev/sdk3
Extend an LV by 16MiB using specific physical extents.
lvextend -L+16m vg01/lvol01 /dev/sda:8-9 /dev/sdb:8-9
Extend an LV to use all remaining free space in volume group and
all resize its filesystem with fsadm(8).
lvextend -l+100%FREE -r vg01/lvol01
SEE ALSO
lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),
pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8),
pvremove(8), pvresize(8), pvs(8), pvscan(8),
vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8),
vgcreate(8), vgconvert(8), vgdisplay(8), vgexport(8),
vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8),
vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8),
vgs(8), vgscan(8), vgsplit(8),
lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8),
lvextend(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8),
lvs(8), lvscan(8),
lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),
dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8),
cmirrord(8), lvmdbusd(8), fsadm(8),
lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7),
lvmthin(7), lvmvdo(7), lvmautoactivation(7)
COLOPHON
This page is part of the lvm2 (Logical Volume Manager 2) project.
Information about the project can be found at
⟨http://www.sourceware.org/lvm2/⟩. If you have a bug report for
this manual page, see ⟨https://github.com/lvmteam/lvm2/issues⟩.
This page was obtained from the project's upstream Git repository
⟨git://sourceware.org/git/lvm2.git⟩ on 2024-06-14. (At that
time, the date of the most recent commit that was found in the
repository was 2024-06-11.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
Red Hat, Inc. LVM TOOLS 2.03.25(2)-git (2024-05-16) LVEXTEND(8)
Pages that refer to this page: lvmcache(7), lvmraid(7), lvmthin(7), lvmvdo(7), dmeventd(8), lvchange(8), lvconvert(8), lvcreate(8), lvdisplay(8), lvextend(8), lvm(8), lvmconfig(8), lvmdevices(8), lvmdiskscan(8), lvm-fullreport(8), lvm-lvpoll(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8), pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8), resize2fs(8), vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgconvert(8), vgcreate(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8)