vgextend(8) — Linux manual page
VGEXTEND(8) System Manager's Manual VGEXTEND(8)
NAME
vgextend — Add physical volumes to a volume group
SYNOPSIS
vgextend position_args
[ option_args ]
DESCRIPTION
vgextend adds one or more PVs to a VG. This increases the space
available for LVs in the VG.
Also, PVs that have gone missing and then returned, e.g. due to a
transient device failure, can be added back to the VG without re-
initializing them (see --restoremissing).
If the specified PVs have not yet been initialized with pvcreate,
vgextend will initialize them. In this case pvcreate options can
be used, e.g. --labelsector, --metadatasize, --metadataignore,
--pvmetadatacopies, --dataalignment, --dataalignmentoffset.
USAGE
vgextend VG PV ...
[ -A|--autobackup y|n ]
[ -f|--force ]
[ -Z|--zero y|n ]
[ -M|--metadatatype lvm2 ]
[ --labelsector Number ]
[ --metadatasize Size[m|UNIT] ]
[ --pvmetadatacopies 0|1|2 ]
[ --metadataignore y|n ]
[ --dataalignment Size[k|UNIT] ]
[ --dataalignmentoffset Size[k|UNIT] ]
[ --reportformat basic|json ]
[ --restoremissing ]
[ COMMON_OPTIONS ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --devices PV ]
[ --devicesfile String ]
[ --driverloaded y|n ]
[ --journal String ]
[ --lockopt String ]
[ --longhelp ]
[ --nohints ]
[ --nolocking ]
[ --profile String ]
[ --version ]
OPTIONS
-A|--autobackup y|n
Specifies if metadata should be backed up automatically
after a change. Enabling this is strongly advised! See
vgcfgbackup(8) for more information.
--commandprofile String
The command profile to use for command configuration. See
lvm.conf(5) for more information about profiles.
--config String
Config settings for the command. These override
lvm.conf(5) settings. The String arg uses the same format
as lvm.conf(5), or may use section/field syntax. See
lvm.conf(5) for more information about config.
--dataalignment Size[k|UNIT]
Align the start of a PV data area with a multiple of this
number. To see the location of the first Physical Extent
(PE) of an existing PV, use pvs -o +pe_start. In addition,
it may be shifted by an alignment offset, see
--dataalignmentoffset. Also specify an appropriate PE
size when creating a VG.
--dataalignmentoffset Size[k|UNIT]
Shift the start of the PV data area by this additional
offset.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the
detail of messages sent to the log file and/or syslog (if
configured).
--devices PV
Devices that the command can use. This option can be
repeated or accepts a comma separated list of devices.
This overrides the devices file.
--devicesfile String
A file listing devices that LVM should use. The file must
exist in /etc/lvm/devices/ and is managed with the
lvmdevices(8) command. This overrides the lvm.conf(5)
devices/devicesfile and devices/use_devicesfile settings.
--driverloaded y|n
If set to no, the command will not attempt to use device-
mapper. For testing and debugging.
-f|--force ...
Override various checks, confirmations and protections.
Use with extreme caution.
-h|--help
Display help text.
--journal String
Record information in the systemd journal. This
information is in addition to information enabled by the
lvm.conf log/journal setting. command: record information
about the command. output: record the default command
output. debug: record full command debugging.
--labelsector Number
By default the PV is labelled with an LVM2 identifier in
its second sector (sector 1). This lets you use a
different sector near the start of the disk (between 0 and
3 inclusive - see LABEL_SCAN_SECTORS in the source). Use
with care.
--lockopt String
Used to pass options for special cases to lvmlockd. See
lvmlockd(8) for more information.
--longhelp
Display long help text.
--metadataignore y|n
Specifies the metadataignore property of a PV. If yes,
metadata areas on the PV are ignored, and lvm will not
store metadata in the metadata areas of the PV. If no,
lvm will store metadata on the PV.
--metadatasize Size[m|UNIT]
The approximate amount of space used for each VG metadata
area. The size may be rounded.
-M|--metadatatype lvm2
Specifies the type of on-disk metadata to use. lvm2 (or
just 2) is the current, standard format. lvm1 (or just 1)
is no longer used.
--nohints
Do not use the hints file to locate devices for PVs. A
command may read more devices to find PVs when hints are
not used. The command will still perform standard hint
file invalidation where appropriate.
--nolocking
Disable locking.
--profile String
An alias for --commandprofile or --metadataprofile,
depending on the command.
--pvmetadatacopies 0|1|2
The number of metadata areas to set aside on a PV for
storing VG metadata. When 2, one copy of the VG metadata
is stored at the front of the PV and a second copy is
stored at the end. When 1, one copy of the VG metadata is
stored at the front of the PV. When 0, no copies of the
VG metadata are stored on the given PV. This may be
useful in VGs containing many PVs (this places limitations
on the ability to use vgsplit later.)
-q|--quiet ...
Suppress output and log messages. Overrides --debug and
--verbose. Repeat once to also suppress any prompts with
answer 'no'.
--reportformat basic|json
Overrides current output format for reports which is
defined globally by the report/output_format setting in
lvm.conf(5). basic is the original format with columns
and rows. If there is more than one report per command,
each report is prefixed with the report name for
identification. json produces report output in JSON
format. See lvmreport(7) for more information.
--restoremissing
Add a PV back into a VG after the PV was missing and then
returned, e.g. due to a transient failure. The PV is not
reinitialized.
-t|--test
Run in test mode. Commands will not update metadata. This
is implemented by disabling all metadata writing but
nevertheless returning success to the calling function.
This may lead to unusual error messages in multi-stage
operations if a tool relies on reading back metadata it
believes has changed but hasn't.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase
the detail of messages sent to stdout and stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always
assume the answer yes. Use with extreme caution. (For
automatic no, see -qq.)
-Z|--zero y|n
Controls if the first 4 sectors (2048 bytes) of the device
are wiped. The default is to wipe these sectors unless
either or both of --restorefile or --uuid are specified.
VARIABLES
VG Volume Group name. See lvm(8) for valid names.
PV Physical Volume name, a device path under /dev. For
commands managing physical extents, a PV positional arg
generally accepts a suffix indicating a range (or multiple
ranges) of physical extents (PEs). When the first PE is
omitted, it defaults to the start of the device, and when
the last PE is omitted it defaults to end. Start and end
range (inclusive): PV[:PE-PE]... Start and length range
(counting from 0): PV[:PE+PE]...
String See the option description for information about the
string content.
Size[UNIT]
Size is an input number that accepts an optional unit.
Input units are always treated as base two values,
regardless of capitalization, e.g. 'k' and 'K' both refer
to 1024. The default input unit is specified by letter,
followed by |UNIT. UNIT represents other possible input
units: b|B is bytes, s|S is sectors of 512 bytes, k|K is
KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E
is EiB. (This should not be confused with the output
control --units, where capital letters mean multiple of
1000.)
ENVIRONMENT VARIABLES
See lvm(8) for information about environment variables used by
lvm. For example, LVM_VG_NAME can generally be substituted for a
required VG parameter.
EXAMPLES
Add two PVs to a VG.
vgextend vg00 /dev/sda4 /dev/sdn1
SEE ALSO
lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),
pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8),
pvremove(8), pvresize(8), pvs(8), pvscan(8),
vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8),
vgcreate(8), vgconvert(8), vgdisplay(8), vgexport(8),
vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8),
vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8),
vgs(8), vgscan(8), vgsplit(8),
lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8),
lvextend(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8),
lvs(8), lvscan(8),
lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),
dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8),
cmirrord(8), lvmdbusd(8), fsadm(8),
lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7),
lvmthin(7), lvmvdo(7), lvmautoactivation(7)
COLOPHON
This page is part of the lvm2 (Logical Volume Manager 2) project.
Information about the project can be found at
⟨http://www.sourceware.org/lvm2/⟩. If you have a bug report for
this manual page, see ⟨https://github.com/lvmteam/lvm2/issues⟩.
This page was obtained from the project's upstream Git repository
⟨git://sourceware.org/git/lvm2.git⟩ on 2024-06-14. (At that
time, the date of the most recent commit that was found in the
repository was 2024-06-11.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
Red Hat, Inc. LVM TOOLS 2.03.25(2)-git (2024-05-16) VGEXTEND(8)
Pages that refer to this page: lvchange(8), lvconvert(8), lvcreate(8), lvdisplay(8), lvextend(8), lvm(8), lvmconfig(8), lvmdevices(8), lvmdiskscan(8), lvm-fullreport(8), lvm-lvpoll(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8), pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8), vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgconvert(8), vgcreate(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8)