Questions tagged [refinishing]
49 questions
8
votes
4 answers
How can I remove paint and rust from a metal 1950s cabinet?
I have a 50s metal medical cabinet that I would like to restore. I don't have access to a stripping tank so what would be the best way to remove old paint and rust. I'd love to get it back to metal and clear coat it.. is that possible?
Julia Mickum
- 81
- 1
- 2
4
votes
2 answers
Time to get rid of Rust-Oleum Textured Stone spray paint finish on wood
About 30 years ago I used Rust-Oleum spray paint to put a textured fake stone finish on a wooden nightstand for my young son's room. (It worked with this decor, trust me.) Now I want to be able to paint that nightstand for the guestroom using…
Janet
- 43
- 3
3
votes
4 answers
Refinishing particle board with vinyl veneer
I have an old cabinet that is made from engineered wood with a laminate finish that resembles wood, but is definitely not hardwood. I am not sure what the finish is called but it is paper thin and not made of any real wood. See attached photo. From…
user522
- 31
- 1
- 3
2
votes
1 answer
Will these stripes be very visible if I apply finish to the hardwood floors without doing more sanding?
I recently decided to refinish the hardwood floors on the second story of my home. To do this, I rented a drum sander from a local rental facility, and ran it over the floors up through the procession of grits. The results can be seen at the…
ho88it
- 23
- 3
2
votes
3 answers
Using a pressure washer to prepare a deck for refinishing
I have an ironwood (ipe) deck which has weathered to grey where it is exposed to the elements. Previously I have refinished it by sanding (very laborious) before reapplying stain/finish. I am considering trying to use a pressure washer to replace…
Enkarht Khani
- 35
- 5
2
votes
2 answers
How to restore copper hip roof
Over my bay window is a copper roof. Unfortunately the roof above doesn't have gutters yet. Where the water drops on the hip roof it is discolored. What is the best way to get this looking good again?
JD74
- 1,854
- 6
- 13
2
votes
1 answer
How to refinish a checker topped table?
What would be the best approach for sanding down a oak table that has a checkered top with grains going in opposite directions. The squares are approximately 3" x 3". Any advice would be greatly appreciated. Thanks!!
Kole Stewart
- 23
- 3
2
votes
0 answers
Transparent stain on refinished windows requiring filler?
I'm having some old wooden windows restored. They currently have a dark stain with (the remains of) a transparent finish, and in an ideal world I'd want to stay with that. However the wood is in bad shape in some areas and will end up with some…
EricS
- 121
- 2
2
votes
1 answer
How to finish around the inside of new windows after replacing old ones
New windows were put in about a year ago and we were left with the result shown in the photos. I'm tired of seeing this and want to fix and finish it myself. However, I'm not sure what steps to take.!
Chantel Carter
- 21
- 1
- 3
2
votes
0 answers
Is there a non-specialty paint that can be used on microwave interior?
The interior of my older low-end microwave, where the rotating tray rollers contact, has worn through the original finish and become rusty.
There are specific microwave refinishing paints available, but they are costly enough to make getting a new…
Cameron Roberts
- 231
- 1
- 8
1
vote
0 answers
How best to maintain outdoor wood furniture that is too intricate to traditionally sand and refinish?
I have some chairs that look like this. I have experience sanding and refinishing wood furniture that is either "mostly planar" or easily disassembled, but these chairs are so intricate (especially the "hammock" portion) that I am dreading finicky…
Enkarht Khani
- 35
- 5
1
vote
1 answer
Must the old clear coat come off before putting new polyurethane on?
Our kitchen cabinet doors have clear coat (unknown what it is) probably from the 60's. It has worn off in places and looks bad in general so I want to sand them down and put on fresh polyurethane. Do I need to take the doors down to bare wood…
tnknepp
- 1,458
- 3
- 17
- 35
1
vote
1 answer
Can the water stains in this hardwood floor be sanded out?
Do you think sanding will be able to take out these water marks, or do the boards need to be replaced? The water damage is old (prior to the previous owner, so at least 12 years) and the floor is possibly heart pine (definitely soft). I plan to sand…
Jenna
- 11
- 2
1
vote
1 answer
How to restore the brushed finish on stainless steel appliances
Someone in our household absentmindedly used a green ScotchBrite pad to clean a couple of the stainless steel appliances in our kitchen. In some cases, they went across/against the grain.
The appliances (Kitchenaid and Frigidaire) have the rough…
gnicko
- 6,251
- 2
- 24
- 42
1
vote
0 answers
How to restore satin/brushed finish on brass
Trying to restore this piece of plumbing I bought and accidentally scratched.
In the image below you can see one of the original scratches at the bottom.
I did some research online and found that the brushed look can be restored with a scouring pad,…
Daniel
- 261
- 3
- 14