Questions related to the construction, modification, maintenance, repair of the many functional systems included in a kitchen. Systems include: plumbing, electrical,lighting, major appliances, surfaces (wall, floor).
Questions tagged [kitchens]
1569 questions
48
votes
10 answers
How long should I wait before plugging in a new refrigerator?
Today I received my new refrigerator, and I've been told not to plug it in until a couple of hours have gone by. Some people told me a couple of hours was enough, but others have told me up to 12 hours. I understand the reasons as to why do this…
Fernando Briano
- 667
- 2
- 7
- 9
35
votes
8 answers
How many CFM for a range hood do I REALLY need?
I like to cook. I would like to put in a fairly powerful range (nothing huge, though; I don't need six burners and a griddle), and will need a hood that can carry smoke, heat, steam, grease, etc. from cooking out of the house. The trend seems to be…
Adam Jaskiewicz
- 1,121
- 2
- 8
- 13
35
votes
4 answers
What kind of IKEA screw is this?
This is a screw on the side of an IKEA drawer. On line videos say turn it left or right to level the front of the door. Instructions are to use a Phillips screwdriver. It's not a Phillips head and the local hardware store doesn't recognize it.
Jim Baxter
- 451
- 1
- 4
- 4
26
votes
11 answers
Is it damaging to turn off a small fridge for two days every week?
I am a student who studies in a different city than my home so I go home almost every weekend or second weekend. I recently brought a room sized fridge and to save electricity costs, whenever I go home, I turn off the fridge which is usually for…
khawajayy
- 361
- 1
- 3
- 5
24
votes
4 answers
How do I properly wire GFCI outlets in parallel?
I have two countertop outlets in my kitchen that I am in the process of replacing with new, GFCI-protected outlets. These two outlets are on a circuit together, and they are the only loads on that circuit. After wiring the new outlets up and testing…
Drew Spickes
- 405
- 2
- 4
- 8
21
votes
4 answers
Which Kitchen outlets do NOT need GFCI?
I have the 2 circuits in the kitchen with GFCI outlets, but I'm not quite sure which other ones do NOT need GFCI. Other circuits in the kitchen include Microwave, Fridge, and Dishwasher. It makes sense to me to not have the fridge on GFCI though.
rcav8r
- 259
- 1
- 2
- 4
19
votes
12 answers
Should hardwood floors go all the way to wall under kitchen cabinets?
I’m putting in hardwood floors and I am at the spot where kitchen cabinets would go. The last strip is going to be narrower than whole flooring boards, and usually I would rip the boards going elsewhere in the room. Should I just leave the last few…
David
- 1,107
- 6
- 25
- 40
17
votes
10 answers
Should I run the tap while dumping boiling water?
It seems to be common advice to run the cold water while dumping boiling water down the drain (for example, when draining pasta). A variety of reasons are cited for this, one of which is that it is bad for your plumbing. I assume the reasoning is…
browly
- 355
- 1
- 3
- 9
16
votes
6 answers
Why energy saving bulb flashes when the switch is off?
I have a energy saving spiral light bulb in my kitchen. In exactly every 27 seconds, the first segment of the bulb faintly flashes when the switch is off. And not once, repeatedly every 27 seconds. This weird situation occurs for more than half and…
sevenkul
- 263
- 1
- 2
- 5
15
votes
4 answers
How can I remove a fridge that's trapped in my kitchen?
We bought this house 4 years ago and the kitchen was updated by the prior owner about 7-8 years ago. The Fridge is about 12-13 years old and has been acting up. I started looking at replacements and measuring out our current fridge and its 36" x…
D_D
- 159
- 1
- 3
14
votes
5 answers
Is it safe to swap a 30A "Dryer Socket" with a 40A "Range Socket" if the breaker is 40A?
Just bought a house built in 1979 and am working on renovations. Today we had a new range delivered and ran into an issue trying to install it. Essentially, the old range was connected to a 30A "dryer socket" in the kitchen while the new one…
5E4ME
- 309
- 5
- 11
14
votes
8 answers
What kind of tool can I use to tighten a faucet bolt in a tight place?
I am trying to tighten a kitchen faucet bolt (7/16 inch) in a very tight spot. Please refer to the picture.
Standard size wrenches don't fit well enough for me to turn it. I've used a stubby wrench but I can't get any leverage because of the tight…
DIY Newbie
- 185
- 2
- 2
- 11
12
votes
3 answers
How do I connect a new cooktop that has no white neutral wire?
My old cooktop which is being replaced connects to a j-box with black, red, white, and bare ground wires, which goes to a 40 amp circuit breaker (US here, noticed this site is popular with Europe too).
We just bought a brand-new Bosch cooktop which…
mtjhax
- 223
- 1
- 2
- 6
12
votes
6 answers
What is a good way to cat-proof (or child-proof) kitchen cabinets?
Our 6-month-old kitten has figured out how to reliably open kitchen cabinets at floor-level, by standing on his hind legs and grabbing the knob.
What are some good ways to make it harder for him to get these doors open wide enough for him to walk in…
Ed Brannin
- 223
- 1
- 2
- 6
12
votes
3 answers
Are special screws required inside an oven?
I am replacing the oven grilling element in my Inglis Citation Programmable Cooking Self Cleaning Oven stove model IUP 37500 because it burned out. I have a two-part question.
The OEM element was mounted to the oven roof using a combination bracket…
JohnC
- 341
- 2
- 6
- 15