Questions tagged [spackling-paste]

56 questions
21
votes
9 answers

How big a hole in drywall can be fixed by spackle alone?

How big of a hole in drywall can be fixed by spackle alone? The previous owners left numerous holes in the drywall. Each hole is the diameter of a coaxial cable, which I want to patch up. Can I use spackle to bridge the gap? Or can I press fit a…
pkumar
  • 411
  • 1
  • 3
  • 4
20
votes
8 answers

Why little holes/dots when I apply joint compound?

I can't find answer anywhere, can somebody tell me why and how to avoid these little dots/holes when I spackle. I also including the pic of the compound I'm using.
bell2041
  • 301
  • 1
  • 2
  • 4
8
votes
3 answers

Spackling drywalls around plumbing pipes

What’s the best way to fix drywall holes ~1-1.5” on each side around pipes coming into the wall under sink. I’ve seen folks foam the holes around pipes, but it looks ugly. I was thinking to patch with spackling patch, but this would most likely…
Tagar
  • 391
  • 5
  • 21
7
votes
1 answer

What do I do with unused spackle

Of course they don't have really small containers of spackle. I haven't even used 1/8 of it - Is there anything you can do with the leftovers? How long can you store it?
Maureen
  • 71
  • 1
  • 2
7
votes
3 answers

When can spackle be used instead of mud?

My wife was reading this article, wherein drywall damage due to the removal of construction adhesive was fixed with spackle. HOW TO REMOVE A DATED VANITY BACKSPLASH I thought this kind of repair required joint compound ("mud") and not spackle. When…
ArgentoSapiens
  • 2,465
  • 12
  • 33
  • 43
6
votes
3 answers

How should I seal recently installed windows against airflow?

I had windows installed recently, and when winter came I realized that they didn't fully seal around windows in hard-to-see places. Blue photo is outdoors and the white/pink photo is indoors. I can see inside the house wall through both gaps and can…
Eugene
  • 161
  • 3
6
votes
2 answers

how to fix a poor spackle job?

I've never spackled before and I tried to fill in some space between the wall and the stairs after we took out our carpet. Suffice it to say I used way too much spackle and now I have an uneven mess. What is the best way to fix things now that the…
Moshe
  • 61
  • 1
  • 1
  • 2
5
votes
1 answer

How do I get invisible edges on my spackle jobs?

I have a basement that I am looking to eventually paint. The basement has spackle in various places on the walls, in many cases, way too much spackle appears to be applied, in a rather messy way, with no sanding after the spackling. I am now…
paneerlovr
  • 453
  • 3
  • 7
  • 13
5
votes
14 answers

How do I fill in the grooves in wood paneling in order to paint over it?

Most of my house has wood paneling instead of drywall. I want to fill in the grooves to give my walls a smooth look (drywalling the house is not in the budget). Based on the recommendation of a book, I've tried using spackle. The problem is it…
Greg
  • 217
  • 1
  • 2
  • 9
3
votes
1 answer

Do I really need to wait a month before applying primer to plaster?

I've recently removed wallpaper and now I've gone through and plastered over some bad spots on the wall. I've already sanded it down and it's ready for primer. However, when reading the instructions on the primer, it says new plaster must age for 30…
Jason
  • 757
  • 4
  • 11
  • 23
3
votes
1 answer

Fixing minor tape blemishes/bubbling after a fresh paint job

Unfortunately 1 week after a new paint job was done with a decent job of skimming and all, there was a small flood in a laundry room above. Some water came down, but we averted disaster. It's very minor. You can see some small lines from some…
J.S.
  • 131
  • 2
2
votes
2 answers

Wall surface is too smooth after spackle

I had a hole in some drywall that I repaired with spackle paste. I sanded it down so it is level with the existing drywall. The problem now is that the spackle is smoother than the surrounding drywall. How can I create the same texture in the…
tir38
  • 235
  • 1
  • 3
  • 7
2
votes
2 answers

How do I fix scratches from sanding drywall?

I've never sanded drywall/spackle before so I don't know what is acceptable or not. I'm remodeling my bathroom and have put down a few layers of spackle. Everything looks good and I just wanted to touch it up with some sanding. I'm using a 220-grit…
Mike Willis
  • 370
  • 1
  • 5
  • 12
2
votes
3 answers

Do I need to prime the mud for self adhesive wallpaper?

I've applied the joint compound,sanded it down. Is it necessary to prime the mud before putting self adhesive wallpaper on it? I don't plan on taking it down or painting over it in the future. Would priming the wall change how it sticks etc?
CJO
  • 21
  • 2
2
votes
1 answer

Why is the joint compound cracking around a repaired patch in my ceiling?

Backstory: We had a leak in our roof that damaged some of the ceiling drywall. When we put new drywall up, the pre-existing drywall "sagged" a bit lower than the fresh piece that was screwed into the ceiling joists. Because of this, I layered the…
rynmrtn
  • 349
  • 2
  • 5
  • 11
1
2 3 4