Questions tagged [cabling]

Questions about planning, installing, and servicing all kinds of electrical cabling, such as power, phones, computer networks, speakers, antenna, and so on. See also the [data-wiring] tag.

78 questions
72
votes
14 answers

What should I consider regarding LAN wiring before building a house?

I am planning a small house (4 rooms, 2 floors, no basement, no attic, 120 sq.meters) and I want to run a lot of LAN cables throughout because of poor WiFi experiences in my apartment. Because the house will be built according to my wishes…
Torben Gundtofte-Bruun
  • 1,367
  • 5
  • 15
  • 23
44
votes
10 answers

Can I run CAT5/6 cables parallel to electrical cables?

I am building a new house and am planning to hardwire network cables into each room. Can I run CAT5/6 cables parallel to electrical wires without introducing any general safety issues or losing much in connection quality? Wiring runs for up to 25…
Martin
  • 543
  • 1
  • 4
  • 5
40
votes
7 answers

How do I run ethernet cable through a wall cavity?

I want to install an ethernet jack in an interior wall of one room. I'd like to run the cable up through the wall cavity (so it is hidden) into the crawl space and back down another wall to another jack which would be connected to the network…
Lisa
  • 525
  • 1
  • 4
  • 10
33
votes
4 answers

How to future-proof a long cable run

I'm starting on a project that will involve digging a long (roughly 150-200 meter) trench from my house down to the road. The trench itself will be a considerable expense and so while the ground is open, I plan on laying additional conduit(s)…
Jack Lloyd
  • 433
  • 4
  • 6
26
votes
5 answers

What is the proper way to run Category 6 underground?

I'd like to run some Category 6 cabling underground, for a distance of about 120 ft, between a main home and a 2nd unit, for ethernet connectivity between the two homes. I've run Category 5 indoors before, but running Category 6 and underground is a…
DuckMaestro
  • 403
  • 1
  • 5
  • 9
18
votes
6 answers

How do you push a cable through a standard conduit inside the wall?

I want to expand my network and transmit it wired through my home and office (in another floor). I know the IT part kind of well, but don't know how to push the network cable through a conduit (already know where's the entry and exit). Do you need a…
Anton Dylan
  • 181
  • 1
  • 1
  • 4
15
votes
5 answers

What is the official name for wiring hole stops/plugs and where can I buy them?

We have several holes in our house (floor and external wall) that are used for cables (coax and cat5e). The holes are bigger than the cable that goes through them so we'd like to minimize the excess space (to help prevent bugs from getting…
Mike B
  • 8,223
  • 56
  • 116
  • 154
13
votes
10 answers

How can I run Cat5e cable through a completely finished house?

My family and I are interested in buying a house that was built in 2002. This house is two floors on a concrete slab with a finished bonus room upstairs so there is no attic other than above the garage. I would like each room to have four points…
12
votes
7 answers

Is "don't mix data and power cables" and "don't loop power cables" still valid nowadays?

There are two sayings I keep hearing when talking about wiring e.g. home cinema or computer hardware; Don't wrap data/network cables and power cables up in the same loop because the power cables will mess up the streams of your data cables Don't…
F.P
  • 223
  • 1
  • 2
  • 6
11
votes
5 answers

What type of ethernet cable do I need for outdoor use?

I want to run about 100 meters of Ethernet cable out my attic and down a drainpipe. The cable will be exposed to the elements, and attached to a gigabit switch (indoors) at both ends. What kind of cable do I need? Can I get a basic Cat5E bulk cable,…
Portman
  • 1,099
  • 3
  • 10
  • 14
10
votes
6 answers

How do I run wired internet from a single router to several different rooms in an apartment?

Here is what my apartment layout looks like: The router will be where the arrow points, the little jack icons are (shockingly enough) where I want ethernet jacks in each room. The apartment is currently being renovated, and many of the walls have…
jmac
  • 203
  • 1
  • 2
  • 7
9
votes
4 answers

How do you ground residential network equipment?

I needed to run some Cat5e UTP network cables and decided to add network outlets to most rooms, run new phone wiring and RG6 as well. Much of what I've seen and read about residential and small office installations doesn't mention grounding much but…
OrganicLawnDIY
  • 3,811
  • 10
  • 34
  • 47
9
votes
6 answers

Techniques for putting ends on RJ45 connectors easier?

I've been doing a bunch of cat 5 running lately. I've been putting RJ45 ends on everything I run. I'm finding it is still not that easy for me to get the little wires into the connectors. Do any tools or techniques exist for helping get them into…
lightbord
  • 191
  • 1
  • 1
  • 2
8
votes
4 answers

Running ethernet under ground to another building

I'm trying to run ethernet cable about 250ft underground to the garage. It is going through a hard plastic/rubber tubing under the yard and into the garage. Is there anything I should know before doing this? UTP/STP? cat 5e/cat 6? If a location of…
Aaron
  • 183
  • 1
  • 1
  • 6
8
votes
3 answers

How do I crimp an F-connector onto RG-6 cable?

My current home project is putting RG-6 in the walls instead of through the cold-air returns and across the carpet between rooms. Thanks to some forethought during previous remodeling projects, laying the cable and getting it in the walls is the…
user4302
1
2 3 4 5 6