Home Improvement Stack Exchange
Home Improvement Stack Exchange

Questions tagged [mdf]

77 questions
14
votes
10 answers

How to drill a large clean hole in a particle board?

How to drill a large clean hole in a thin melamine board so that it looks closer to this (factory predrilled, 12mm diameter): than this (my best attempt to replicate so far): I used masking tape, drilled with a small size drill bit first, then…
Johnny Baloney
  • 269
  • 2
  • 6
8
votes
7 answers

How to remove 18ga nails successfully

I used 18ga nails to temporarily fix a bookcase together with my nail gun so I can predrill and screw together. I have since unscrewed and knocked it back apart so that I can fill, paint and then glue & screw it back together. It might be a…
physicsboy
  • 564
  • 1
  • 7
  • 21
5
votes
4 answers

Plywood or MDF for workbench?

I'm planning to build a workbench/storage cabinet for my garage. Because of limited space (the width is only 420mm and the length 1,700mm), and the fact that it will only occasionally be used as a workbench and then only for mostly light duty work,…
user82609
5
votes
1 answer

Rescue water damaged MDF door

One of our vanity doors is in very bad shape after a leak some time ago. Now I'm trying to save it if possible. I've managed to sand away the very bad swells However the bottom feels rather fluffy.  Can I just use any undercoat and paint it with…
John M.
  • 249
  • 3
  • 9
5
votes
3 answers

Should I choose MDF or plywood for my false stair treads?

I'm looking to install false stair treads and risers on my basement stairs. Generally, we're talking about a kit like this: Which is installed with adhesive and finishing nails like this: The project itself looks fairly straightforward, but I…
Chris Cudmore
  • 14,169
  • 7
  • 61
  • 91
4
votes
3 answers

Should I mount a kitchen hanger rail on MDF cabinetry or a glass surface?

I would like to hang a kitchen railing and am facing a dilemma. I'll be hanging simple kitchen utensils on it, and may be a couple of chopping boards. So the expected load will be max 5kg (10 pounds). It's my own house so I can do heavier…
Ryan Phung
  • 141
  • 3
4
votes
3 answers

Plywood, MDF or Chipboard for painted bookshelves?

I am starting to plan some built-in bookshelves that will be painted with mat or eggshell paint. The fronts of the shelves and upright will be moulded maybe with a router or softwood mouldings glued on. We have not yet decided if the shelves…
Walker
  • 6,275
  • 22
  • 66
  • 87
3
votes
1 answer

Fill groove in MDF door

I'm painting some MDF doors, and noticed that someone appears to have run a stanley knife over one of them, perhaps whilst removing them from their packing. I've sanded the area back as much as I can, but the groove isn't completely gone. What…
Kent Boogaart
  • 133
  • 4
3
votes
4 answers

How can I attach a 1/8" strip of steel to MDF so that it stays secure forever for eternity?

I have attached two 3/4" panels of MDF together, so the end result is a 1 1/2"-thick panel. I need to reinforce it so that it does not bow, so I thought of attaching a 1/8"x1 1/2"x6' strip of steel along the edge. Simple research has introduced me…
oscilatingcretin
  • 5,932
  • 53
  • 99
  • 114
3
votes
4 answers

Dado (+glue) or just screws (+glue) for painted MDF bookcase

I am thinking of building some MDF build-in bookcases, dado joints are clearly stronger but creates lots of mess from a router and takes more time. As the book case will be painted, I can hide any screw heads, so that is not an issue. I see 4…
Walker
  • 6,275
  • 22
  • 66
  • 87
3
votes
3 answers

How can I fill and flatten unneeded hinge mortices for painting?

I have removed a bathroom door and installed a sliding barn door on the other side of the wall. The door frame in the bathroom now has the open sores of where the three hinges came off. The house was built in 2004 and all the door frames are…
Nolo Problemo
  • 157
  • 1
  • 5
2
votes
4 answers

MDF (particle board) edge sealing for smooth painted finish

I am working with CNC routers and a lot of MDF, which is great UNLESS you need to paint the edges which are furry in some spots and all open and porus everywhere else. I build plinths that need to be enamel smooth and show no seams or texture…
Oliver Kellow
  • 151
  • 2
  • 4
2
votes
1 answer

Industrial strength velcro peeling off MDF

I bought some industrial strength low profile velcro in order to make wall mounting stations for a fan. The fan (about 8 lbs) slides onto hooks screwed into 24"x7" pieces of 1/2 inch thick MDF. The loop side of the velcro is stuck to the back of the…
Tom Smilack
  • 121
  • 2
2
votes
1 answer

Which kind of board is easiest to work with?

I am building a model for a school and need a material to build it out of. I was wondering which of these three boards are easiest to work with? MDF, Chipboard, Pine or Plywood? The following are the most important in my choice How easy is it to get…
Deep
  • 121
  • 3
2
votes
1 answer

How can I repair my bathroom cabinet?

I've got a Medium-density fibreboard (MDF) sink cabinet that is at least 30, if not 50 years old. The bottom has gotten wet a few hundred times from a shower that was near it, and it is flaking apart at the bottom where it meets the linoleum. It's…
RLZaleski
  • 469
  • 7
  • 13
  • 28
1
2 3 4 5 6